dowel pin信息详情
合钉；定缝销钉；开槽销；接合销
dowel───vt.用暗销接合；为…装暗榫；n.[木]木钉；暗榫；合板钉
dowel rod───传力杆
dowel maker───销钉制造机
dowel jig───定位销夹具
pin───n.大头针，别针，针；栓；琐碎物；引脚；vt.钉住；压住；将……用针别住
dowel nuts───定位螺母
dentine pin───牙本质钉
pin nailer───钉钉机
scarf pin───围巾夹针
Fit a dowel pin here to keep the adjacent parts aligned.───这里装一个定位销，是相邻的两个部件对准。
Position drive plate on the crankshaft's dowel pin and press on to the crankshaft flange.───传动盘安放在曲轴的定位销上，然后压到曲轴法兰上。
Not all parts will receive dedicated dowel pin holes.───并非所有的部分将得到专门的柱销孔。
Bottom Container Plate Dowel Pin Lug A lug attached to the Bottom Container Plate that supports the Dowel Pin Bushing.───装配在底座上，用来支承定位销套的突缘
Objective To compare the long term effectiveness of three types of dowel pin as treatment post core crowning.───目的比较3种类型桩钉作桩核冠修复体的远期疗效。
All major sub-assemblies are edge-justified or dowel-pin registered to precision datum surfaces or holes in the base frame.───所有主要部件总成应该与底架上的精密加工的表面或孔进行边缘调整对齐或定位销对准
the removable flat car is connected with removable electric discharging car by dowel pin.───该移动式平板车和移动电动卸料小车之间采用柱销连接。
Study of Evaluation Approach of the Quality of Locating Plan for Dowel-pin Modular Fixture───孔系组合夹具定位质量的评价方法研究
An automatic approach to fixture configuration design for dowel-pin modular fixture system───一种孔系组合夹具夹紧装置构形设计方法
Objective To compare the long term effectiveness of three types of dowel pin as treatment post core crowning.
What would be the bottom surface of the block is then skimmed flat, and locating dowel pin holes are drilled.
The reason for abrasive wear resistance enhancement of bionics smooth surface made by Laser Carving Technology is grain super-refining strengthening, hardening, effect of dowel pin and bionics.
Fit a dowel pin here to keep the adjacent parts aligned.
Not all parts will receive dedicated dowel pin holes.
The connection type between the vertical guide plate of the vertical adjusting mechanism and the positioning plate can adopt compression-fitting connection or dowel pin type connection.