die temperature发音

意思翻译

模温；核心温度

相似词语短语

temperature───n.温度；体温；气温；发烧

die die die───死吧，死吧

die die───模具

critical temperature───[物][电子]临界温度；n.临界温度

temperature outside───室外温度

temperature rise───[电]温升；温度上升；温度上升，温升，升温

constant temperature───[热]恒温；定温；等温；等温，恒温

fluctuating temperature───波动温度；脉动温度；脉动温度，波动温度

low temperature───低温，低温度；[物]低温

双语使用场景

Die temperature has great effects on the cell structure and foam properties.───机头发泡口模温度对发泡体结构和性能有关键性影响。

Second, improved crystalline behavior, speeded up the crystallization velocity, reduced the die temperature.───其二，改变结晶行为，加快结晶速度，降低成型加工模温。

Does the gate velocity of the metal influence the die temperature?───浇口的速度是否影响模具的温度？

Again pulling out the textbook, I demonstrated how base-emitter voltage relates directly to the die temperature, as well.───再次掏出教科书，我证明了与死区温度的直接联系基射极电压。

Neural network method was used to investigate the parison swell affected by the die temperature and extrusion flow rate.───采用神经网络方法预测了受模口温度和挤出流率影响的型坯成型阶段的膨胀。

A die temperature controller which uses heating medium oil with high temperature to control the die temperature of magnesium was introduced.───介绍了一种利用高温导热油来控制镁合金压铸模温度的设备。

check die temperature and glue viscosity, test each batch of finished pads.───检查模具温度和胶水的粘度，测试每一批成品垫。

Industry: Stamping die; Temperature Switches; Computer processing; Mold; Instrument Processing; Temperature control (adjustable) devices;───所属行业：冲压模；温控开关；电脑产品加工；模具加工；仪器仪表加工；温度控制（调节）器；；

Design and Development of a New Die Temperature Controller for Magnesium Die Castings───一种新型镁合金压铸模具温控机的设计开发

英语使用场景

The extrudate's total polyphenol content and total catechin content were independent of the die temperature.

Neural network method was used the parison swell by the die temperature and extrusion flow rate.

The results show that the DBRF changes greatly with the increase of die temperature, which has unnegligible influence on the accuracy of the mathematical solution model for DBRF.

The relation between extrudate density and screw speed, die temperature is also discussed.

The network inputs include extruder temperature, die temperature , melt flow rate, air flow rate, die to-collector distance.

Again pulling out the textbook, I demonstrated how base-emitter voltage relates directly to the die temperature, as well.

Die temperature has great effects on the cell structure and foam properties.