die diameter信息详情
口模直径
diameter───n.直径
die die die───死吧，死吧
die die───模具
inside diameter───[数]内径
outside diameter───外直径；外径
shilling diameter───先令直径
dime diameter───一角直径
pitch diameter───层心直径，（齿轮的）节径，（螺纹的）中径；[机]节圆直径
equatorial diameter───赤道直径（等于12753.44公里）
When annealed wire diameter necking: copper wire in hard state, export module is sizing die, tension size not the wire diameter wire drawing.───后线径变细：铜线在硬态时，出口模就是定径模，张力大小不至于把线径拉丝。
Extruding: Extruding is the process of reducing the size of some feature or diameter by forcing it through a die.───挤压加工：的特点是将尺寸减缩或将直径压入模孔。
General continuous annealing export should choose to die than actual need wire diameter 0.0015-0.0035 more appropriate.───一般连续退火出口模要选择比实际需要线径大0.0015—0.0035比较合适。
Influence of expanding-die diameter on the quality of finished products───扩径模具直径对成形件品质的影响
- digital recording
- direct substitution
- direct substitution method
- digital recording system
- die die die die
- direct sunlight
- digital regenerator
- die died
- direct support
- digital registration
- die died dead
- digital regulator
- direct switching system
- die died dying
- digital relay counter
- direct synthesis
- die discharge channel
- digital repeater
- direct synthesizer
- die end
- digital representation