diameter tolerance发音

意思翻译

直径公差

相似词语短语

tolerance───n.宽容，容忍；耐力；公差

diameter───n.直径

inside diameter───[数]内径

outside diameter───外直径；外径

distress tolerance───遇险容限

flatness tolerance───平面度公差

convergence tolerance───收敛公差

fault tolerance───容错（性）；容错，故障容差

capacitance tolerance───[电]电容量允许偏差；电容公差

双语使用场景

The permissible diameter variation (Vdmp, VDmp) is the tolerance for the maximum and minimum mean diameters of one measuring plane.───允许的尺寸变化量是考虑到了最大和最小平均直径公差的测量平面。

For needle roller bearings without inner ring, a suitable internal clearance is achieved by selecting the appropriate tolerance for the raceway diameter.───对于无内圈滚针轴承，通过为滚道直径选择合适的公差，可得到合适的内部游隙。

Measure (the rotor) to see whether its diameter is within tolerance or not.───测量(转子)，看它的直径是否在公差允许范围之内。

The eccentric diameter tolerance which is h9.───偏心直径公差为h9。

Influence of multiple variables introduction on overall diameter tolerance of motorcycle tire───引入多元变量对摩托车轮胎外直径公差的影响

Diameter Tolerance, Ovality and Average Decarburized Layer Depth───直径公差，偏圆度及脱碳层的平均深度

Mathematical analysis for the diameter tolerance of spiral welded pipe───螺旋焊管直径公差的数学分析

Control of taper tolerance and pitch diameter tolerance of API round thread casing───API圆螺纹套管锥度公差和中径公差的控制

Inner ring with reduced bore diameter tolerance───内圈内径公差带变窄

英语使用场景