diameter length发音

意思翻译

直径长度

相似词语短语

diameter───n.直径

length───n.长度，长；时间的长短；<语>音长

inside diameter───[数]内径

outside diameter───外直径；外径

shilling diameter───先令直径

dime diameter───一角直径

pitch diameter───层心直径，（齿轮的）节径，（螺纹的）中径；[机]节圆直径

equatorial diameter───赤道直径（等于12753.44公里）

hydraulic diameter───[机]水力直径；水压直径

双语使用场景

of hydrogen contained in each tube depends on tube diameter, length, and pressure rating.───每个管道的氢容量由管道直径、长度和额定压力决定。

Influence of different tuyere diameter, length and coke particle sizes composition on radial length, width, height and volume in BF tuyere rotary region is studied by calculation.───通过计算，研究了不同风口直径、风口长度和高炉风口焦炭不同粒度组成对高炉风口回旋区的径向长度、宽度、高度和体积的影响。

stability of external pressure vessel mainly depends on crust's geometrical cross-section including diameter, length and wall thickness. Among them, the length and diameter are crucial.───外压设备的抗失稳能力(稳定性)主要取决于壳体的几何尺寸，即直径、长度和壁厚，其中长度和直径起着决定性作用。

The amount of hydrogen contained in each tube depends on tube diameter, length, and pressure rating.───每个管道的氢容量由管道直径、长度和额定压力决定。

Third stage of operation in the cage department; size blanks uniformly to proper outer diameter length and inner diameter dimensions.───保持架加工的第三步工序；将毛胚件加工到适当的长度和内径。

The diameter, length, arch height and space of bond-wires have great impacts on the radio frequency performance of RF power transistor.───键合线的直径、长度、拱高和并列键合线间距等物理参量，均对器件性能有很大影响。

Appearances showed that the plant height, stem diameter. Length and width of maximum Leaf increased.───外观上则表现为：增大了株高、茎粗、最大叶长和最大叶宽。

Diameter, length and volume of gas bubble increase with the gas pressure, and decrease with screw rotational speed.───气泡脱离喷嘴的时间承受随进气压力和螺杆转速的升高而减小。

Diameter, length, and location of pipeline.───管道的直径，长度和安装地点。

英语使用场景

Methods: The cholecystic beds of 128 livers were dissected and the diameter, length, route and position of the middle hepatic vein and its branch in cholecystic bed were observed and measured.

SIZER : Third stage of operation in the cage department; size blanks uniformly to proper outer diameter length and inner diameter dimensions.

Third stage of operation in the cage department; size blanks uniformly to proper outer diameter length and inner diameter dimensions.