deformation zone发音

意思翻译

变形区

相似词语短语

deformation───n.变形

plastic deformation───塑性变形，柔性变形；[力]塑性变形，塑性应变

ductile deformation───延性变形；柔性变形

deformation gradient───[力]变形梯度

deformation retraction───形变收缩

deformation definition───变形定义

elastic deformation───弹性变形；[力]弹性形变

deformation geology───变形地质学

Zone───n.(Zone)人名；(塞)佐内；vi.分成区；n.地带；地区；联防；vt.使分成地带；环绕

双语使用场景

From the plastic flow theory, the three-dimensional deformations and stresses of the deformation zone are formulated.───根据塑性力学流动理论，分析推导了变形区三维变形和应力的数学模型。

Segmentstion is characteristic in the Ziyun deformation zone.───紫云变形带上的分段运动特点十分显著。

calculation method of the flattening in sheet rolling deformation zone, using influence function, was derived.───采用影响函数法推导了薄板轧制时变形区内轧辊弹性压扁的计算式。

The results show that, in the shoulder deformation zone, the fine grain is similar to that of the center of friction stir zone.───结果表明：搅拌摩擦中心区晶粒尺寸与轴肩变形区相似，晶粒比较细小；

With this method, the deformation zone can be very accurately determined.───用这种方法，变形区可以非常准确地确定。

The temperature field of the bar in and out the deformation zone during continuous rolling is simulate by finite element method.───采用有限元法分析了棒材连续热轧中变形区及出变形区时轧件横断面温度场。

The temperature field of the bar in and out the deformation zone during rolling is simulated by FEM .───采用有限元方法分析了棒材连续热轧中变形区及出变形区时轧件横断面温度场。

Meanwhile, the phenomenon of two peaks of temperature on crack tip in the deformation zone is discovered.───同时，发现变形区内裂纹尖端发生温度成双峰变化规律。

Initially identified the distribution and formation mechanism of strong deformation zone and fractured zone in front of the face.───初步确定了回采工作面前方煤体强烈变形带、破碎带的分布范围和形成机制。

英语使用场景

A calculation method of the flattening in sheet rolling deformation zone, using influence function, was derived.

While taking soil deformation into account, the internal dissipation rate in the deformation zone caused by the cohesion variation is half of that occurs on the logarithmic spiral slip surface.

Consequently, it was found that a certain deformation zone length depending on the temperature distribution is necessary to satisfy the geometrical similarity law in cross section.

The Mannesmann barrel-shaped rolls can be designed arid processed easily, but it makes the non-linear deformation zone in skew-rolling and leads to the inhomogeneous wall thickness.

Linear deformation zone of generating wall can be obtained by means of non-linear cone angle plug combined with the barrel-shaped rolls, so the wall accuracy can be increased greatly.

According to the feature of the deformation zone in ring gear gag precision blanking , the effect of hydrostatics stress on metal plastic is analyzed in the theory.

On the basis of experiment and change of metal flow line, metallographic structure and micro-hardness in deformation zone, this paper researched process, characteristic and mechanism of fine-blanking.