deformation rate发音

意思翻译

变形率；应变率

相似词语短语

deformation───n.变形

plastic deformation───塑性变形，柔性变形；[力]塑性变形，塑性应变

ductile deformation───延性变形；柔性变形

deformation gradient───[力]变形梯度

deformation retraction───形变收缩

deformation definition───变形定义

elastic deformation───弹性变形；[力]弹性形变

deformation geology───变形地质学

rate───n.(Rate)人名；(法、塞)拉特；n.比率，率；速度；价格；等级；vi.责骂；被评价；vt.认为；估价；责骂

双语使用场景

It concluded that deformation rate showed specific effect on the four textural parameters involved, but deformation degree had none.───结果表明，压缩程度对考察的四个质构参数有显著影响，压缩速率无显著影响。

of eutectic decreases slightly with the increase of deformation rate.───共晶熔化开始温度随形变率的增大略有下降。

If the cold deformation rate is higher than 70 %, the recrystallized grain size distribution agrees with lognormal distribution.───在冷形变量大于或等于70 %时，其再结晶晶粒尺寸分布符合对数正态分布。

Vertical suspended sintering furnace with a production of small, sintering deformation rate of over 95% of the benefits, but complex.───笔直悬挂烧结炉具有烧结变形小，不败品率达95%以上的弊端，但摆设驳杂。

Deformation rate influence the temperature rise of forging, a reasonable choice could influence the forging of forming to a certain extent.───变形速率影响锻件的温升，其合理选择对锻件成形有一定影响。

The interface stability and the interfacial bonding strength is getting better with the reduction of the interface deformation rate.───界面变形率越小，界面稳定性越好，界面结合强度越高。

With the humidity further diffusion, the deformation of tunnel increases but the deformation rate decreases, and eventually converges.───随着湿度的进一步扩散，隧洞的变形总量增加，但变形速率逐渐降低，并最终得以收敛；

The influence of rainfall and excavation on slope displacement is proven immediately by increasing slope deformation rate.───同时监测结果表明，降雨和开挖使边坡位移速率显著增大。

It concluded that deformation rate had specific effect on the four textural parameters involved, but little effect on deformation degree.───结果表明，压缩程度对考察的四个质地参数有显著影响，压缩速率无显著影响。

英语使用场景

If the cold deformation rate is higher than 70 %, the recrystallized grain size distribution agrees with lognormal distribution.

The isoplethes of vertical deformation rate or their tangents are almost perpendicular to fault line.

Flow stress of different temperatures and deformation rate on AZ31B magnesium alloy sheets of different preparation method was studied by tensile test machine and metalloscope.

The results show that cold-roll texture mainly consists of copper-type texture, R-type texture and some S-type texture, when the general deformation rate is 96%.

With the decreases of deformation temperature and increases of deformation degree and deformation rate, the recrystallized grain size decreases and the recrystallization volume percent increases.