deformation distribution信息详情
变形分布
deformation───n.变形
distribution───n.分布;分配;供应
plastic deformation───塑性变形,柔性变形;[力]塑性变形,塑性应变
ductile deformation───延性变形;柔性变形
deformation gradient───[力]变形梯度
deformation retraction───形变收缩
deformation definition───变形定义
symmetrical distribution───对称分布,对称分配
elastic deformation───弹性变形;[力]弹性形变
According to the analysis results, the model structure and part parameters were optimized to improve the press and deformation distribution.───针对模型有限元分析结果,改进模型结构改变部件参数来消除应力集中和变形过大的现象。
and strain contours of the stator under an even inner pressure and a pressure difference, deformation distribution varied with pressure were obtained.───和螺杆进行接触计算,结果表明:定子与螺杆在圆弧顶接触时,剪应变和变形最大;
On the other hand, simulate the interference fitting process to get the deformation distribution of the mould cavity by steel mould correlation method.───另一是用钢模比拟法对扁挤压筒预紧装配过程进行模拟,获得了挤压筒内孔型腔变形规律。
According to the analysis results, the model structure and part parameters were optimized to improve the press and deformation distribution.───然后针对模型有限元分析结果,改进模型结构改变部件参数来消除应力集中和变形过大的现象。
The classical plastic theory is cited to explain the deformation distribution.───并结合塑性加工的变形理论对分布规律进行分析。
Research on deformation distribution law of slope in Large dry-dock by geotechnical centrifuge model test and prototype observation───软土地区大型干坞边坡变形规律离心模型试验及实测研究
- decarburizing cycle
- date of application
- dial telephone set
- density independent
- decarburizing effect
- designed capacity
- deformation disturbance
- density index
- date of birthday
- dial telephone system
- designed conditions
- deformation drag
- decarburizing gases
- density indicator
- designed data
- date of certification
- deformation effect
- decarburizing layer
- dial teletypewriter
- density inhibition
- designed displacement