deformation analysis信息详情
变形分析
deformation───n.变形
analysis───n.分析;分解;验定
plastic deformation───塑性变形,柔性变形;[力]塑性变形,塑性应变
ductile deformation───延性变形;柔性变形
deformation gradient───[力]变形梯度
deformation retraction───形变收缩
deformation definition───变形定义
elastic deformation───弹性变形;[力]弹性形变
deformation geology───变形地质学
Mechanical calculation and structural deformation analysis were performed in the system design.───通过力学计算及结构变形分析,为系统设计提供参考。
The obtained displacements can be used for further deformation analysis of each tectonic block.───得到的这种位移可作为各块体变形分析的基础。
It is very important for deformation analysis in time and frequency domains.───它对变形的时域分析和频域分析有着重要意义。
Finally, it proves the inherent strain method can be used for welding deformation analysis of large-scale structure of the spot welding.───最终得出固有应变法可用于大型点焊结构的焊接变形分析过程中。
While, their influences are systematic, which needs a special attention when GPS results are applied to crustal deformation analysis.───同时,相对于原模型、方法、框架,其影响也可能是系统性的,在将GPS定位结果应用于地壳形变分析时尤为值得关注。
This method could be extended to the strength and deformation analysis of rotate-shell structure under axial-symmetry pressure.───在现有研究的基础上,可以将该方法的应用范围推广至轴对称压力作用下的环-球型回转壳结构。
Considering the limitation of single point deformation analysis, the contour method for integral deformation analysis is put forward.───针对单点变形分析的局限性提出了整体变形分析的等值线法。
In this paper, the formulations and beam plate element model for large deformation analysis of eccentrically stiffened plates are presented.───给出了偏心加筋板大变形分析的理论公式和相应的梁板单元模型。
The deformation analysis is the foundation of pattern design for castings.───铸件变形分析是铸造模样设计的依据之一。
The general principle of DDA, discontinuous deformation analysis, and the shear strength reduction are discussed simply.
Traditionally discontinuous deformation analysis ( DDA ) method adopts linear displacement mode, which has many defects.
Described the principle of 2 - D discontinuous deformation analysis ( DDA ) and the numerical model of bolt.
The development of Kalman filtering for deformation analysis and deformation forecasting.
An approach for modeling rock crack propagation using discontinuous deformation analysis DDA method is presented.
Combining with the relative movement parameters, a deformation analysis method of successive approximations is presented.
This paper applies the theory of limited deformation analysis to the non-linear problem of the geometrician and creeping material for the frozen-wall.
- dial instrument
- date for love
- density field
- decarbonizing enengy
- designated mooring
- dial intercommunicating system
- date form
- deformation angle
- density flotation
- decarbonizing industry
- designated offences
- dial micrometer
- density flow
- deformation at break
- date format error
- designated person
- dial micrometre
- decarbonizing its economy
- density fluctuation
- deformation at failure
- designated router