design pressure信息详情
[建]设计压力;设置压力
pressure───vt.迫使;密封;使……增压;n.压力;压迫,[物]压强
design───n.(Design)(巴、印、俄)迪赛(人名);v.设计,构思;计划;制造,意欲;n.设计;构思;设计图样;装饰图案;打算
hydraulic pressure───液压;水压;n.水压; 液压
pressure from───来自于……的压力
ambient pressure───环境压力,周围压力;[流]环境压力;周围压力
peer pressure───同伴压力;来自同辈的压力;同辈压力; 同侪压力; 同龄人压力
external pressure───外部压力,外压,外压力
hydrostatic pressure───流体静压(力);[流]液体静压力
downward pressure───向下压力;下向压力
seal air fans deliver a design pressure that is above the operating pressure in the flue work.───密封风机能使空气达到设定的压力,此压力应高于烟气在烟道中的运行压力。
Design pressure shall be as specified on Purchaser's drawing or data sheet.───设计压力在买方图纸或数据表中加以指定。
pressure of sweeping shall not exceed the design pressure of the container or the piping system.───吹扫压力不得超过容器和管道系统的设计压力容器和管道系统的设计压力。
Gas welding equipment. Rubber and plastic hoses assembled for compressed or liquified gases up to a maximum design pressure of 450 bar.───气焊设备.能承受最大检验设计气压为450巴的压缩和液化气用橡胶和塑料软管组件
Department as long as the valves at the valve of the pressure changes in the design pressure range, without any artificial adjustment.───只要阀门处的压差变化在阀门的设计压力范围内,无需任何人为的调节。
When the system pressure exceeds the design pressure, anti-exploding slice would break itself, which can prevent exploding.───当系统压力超过设计压力时,防爆片自行破裂,防止系统发生爆炸。
The design pressure is set significantly higher than the normal operating pressure to minimize the possibility of an accidental EO release.───设计压力被设定为大大高于普通工作压力,以将发生环氧乙烷泄漏事故的可能性降至最低。
Also includes cutting force calculation and the cutting clearance choice, the main points of design pressure center calculation.───同时也包含了冲裁力计算,冲裁间隙选择,压力中心计算的设计要点。
Internal expansion joint shall be adopted to single tube side float head heat exchanger for avoiding from large temperature difference stress, when design pressure on shell side is larger.
- deflection scale
- decajoins
- data-translation equipment
- diagonal stanchion
- design principle
- denotes a mandatory field
- deflection senditvity
- diagonal stock
- design principles
- decal
- denotes a required field
- data-transmission channel
- diagonal stratification
- design problems
- denotes compulsory fields
- decalc
- deflection senstivity
- diagonal stripes
- design problems go to
- decalcified
- deflection separator