depth of cut发音

意思翻译

切截深度；切刀屑厚度

相似词语短语

depth───n.[海洋]深度；深奥

cut of───殊

great depth───大纵深；大深度

cut cut───切，切

midship depth───船中深度

axially depth───轴向深度

moulded depth───[船]型深；模深

total depth───全深比；全齿高

depth strider───纵深漫游者

双语使用场景

machine tools were operated by craftsmen who decided many variables such as speeds, feeds, and depth of cut, etc.───机床通常是由工人操作并由他们决定机床速度、进给量、切削深度等。

Depth of cut, d, is the normal distance between the unmachined surface and the machined surface.───深度d是未加工面与已加工面之间的垂直距离。

three factors of cutting include cutting speed, feed and the depth of cut.───切削用量三要素包括切削速度、进给量和（或叫吃刀量）。

The results showed that: the depth of cut had the main influence on cutting force followed by feed rate and cutting speed in turn.───研究结果表明：切削用量中背吃刀量对主切削力的影响最大，进给量次之，切削速度对主切削力的影响最小。

The cutting operation is performed at a certain desired peripheral speed of the workpiece, feed rate, and depth of cut.───切割手术是表现在某一个理想的外设速度的工件，进给速度，切削深度。

This particular model predicts the depth of cut achievable with any given set of process parameters.───这个模糊控制模型可以预测在任何给定一组加工参数时，可获得的切割深度。

Any desired depth of cut can be obtained by the cross feed of the grinding wheel.───通过砂轮的横向进给能得到任意所需的切削深度。

During a facing operation, feed is provided by the cross slide, whereas the depth of cut is controlled by the carriage or compound rest.───在端面车削操作中，进给由横向滑板提供，而切削深度则通过大拖板或复式刀架控制。

The results have indicated that the strength of AE increases slightly under super high wheel speed and large depth of cut.───结果表明，即使在砂轮超高速和大切深下，声发射增加仍较小。

英语使用场景

As we can see in that figure, the depth of cut (and consequently the load) gradually increases on the successively engaged cutting edges.

Using the saw with an excessive depth of cut setting increases loading on the unit and susceptibility to twisting of the blade in the kerf.

Any desired depth of cut can be obtained by the cross feed of the grinding wheel.

They provide a constant depth of cut and fewer blade changes.

Depth of cut, d, is the normal distance between the unmachined surface and the machined surface.

In this paper, effects of depth of cut and feedrate on mechanical properties of metallic fiber are investigated by spinning bit.

This particular model predicts the depth of cut achievable with any given set of process parameters.

The depth of cut is adjusted by the cross feed of the grinding wheel into the workpiece.

Besides, if the feed and depth of cut is increased, the lubrication effect will become poor, and the reducing extent of the cutting force will be reduced.