cylinder wall发音

意思翻译

缸壁

相似词语短语

cylinder───n.圆筒；汽缸；[数]柱面；圆柱状物

oxygen cylinder───储氧筒，氧气瓶；氧气瓶；储氧筒

circumscribing cylinder───外切圆柱

cylinder head───[机]气缸盖

armorack cylinder───军械架筒体

pneumatic cylinder───气缸，气压缸

actuating cylinder───[机]作动筒；[动力]主动油缸；制动气缸；作动筒; 主动筒; 动力气缸; 主动油缸

master cylinder───[机]主缸；制动缸；控制缸；主缸; 主油缸; 控制缸

dynamometric cylinder───测力计气缸

双语使用场景

It passes over the top of the ring, and gets behind it to force it outward against the cylinder wall.───气体流过密封环顶端并进入其后面，施加向外的压力到缸筒壁上。

The main section of a piston is known as the skirts. It forms a bearing area in contact with the cylinder wall.───活塞的主要部分叫活塞裙部。其与气缸壁接触形成了支承面。

cylinder swirl is mainly formed by the strong air flow near the cylinder wall.───缸内涡流主要由气缸周边处的强气流产生；

The heat damage led to cracking through the cylinder wall. Salvage was not possible.───热损伤导致内筒壁穿透性裂纹而无法弥补。

In the two-cycle engine, the piston ACTS as a valve, clearing valve ports in the cylinder wall as it nears BDC.───在二行程发动机中，活塞起到阀门的作用，当活塞接近下止点时，使气缸壁上的进排气口打开。

The repeated measurement data to cylinder wall at the same location , basically described the same change of degree of uniformity.───对圆筒内壁同一位置圆周的多次测量数据基本描述了该圆周的一致均匀度变化。

For most engines, cast iron has been found to be a satisfactory cylinder-wall material.───对于大部分发动机来说，铸铁是气缸壁的良好材料。

The oil -control rings scrape off excessive oil from the cylinder wall and return it to the oil pan .───油环的作用是刮去气缸壁上多余的机油，使之流回油底壳。

英语使用场景

Helical port also produces swirl by airflow interaction of valve gap and cylinder wall, so swirl number depends on helical line direction of relevant cylinder center.

Compressing the rings gives them an initial tension; they press tightly against the cylinder wall.

The heat damage led to cracking through the cylinder wall. Salvage was not possible.

A hole in the lower part of the cylinder wall lets in gas and air.

The cylinder wall profile has direct influence on discharge volume, pressure variety and vane's motion.

As the piston nears BDC , it passes the intake and exhaust ports in the cylinder wall. Burned gases, still under some pressure, begin to stream out through the exhaust port.

It equipped with piston rings to provide a good seal between the cylinder wall and piston.

As the piston moves in the cylinder bore, the piston rings press against the cylinder wall, providing a seal for combustion gases and keeping lubricating oil from being burned.

The main section of a piston is known as the skirts. It forms a bearing area in contact with the cylinder wall.