destination register信息详情
目的寄存器
destination───n.目的地，终点
register───n.登记表；声区；语体风格；调风口；现金收入记录机；学校点名册；（老师对学生的）点名登记；登记员；登记注册；套准；n.(Register)（美）雷吉斯特（人名）；v.登记；（旅馆）登记住宿；挂号邮寄；表达（意见或情感）；显示（读数）
destination country───前往目的地国；到达国
ending destination───终点目的地
top destination───首选目的地
holiday destination───度假目的地；度假胜地
register c───寄存器c
register file───[计]寄存器文件；寄存蒲；[计] 寄存器文件
principle destination───主要目的地
Selects the destination register for the result of the current stage identified by.───标识的当前贴图层的结果选择目标寄存器。
If it did this, then the destination register would have to be twice as large as the source register.───如果的确如此，那么目的寄存器将会有源寄存器的两倍之长。
The first operand is the destination register and the second is the D-Form address to load."───第一个操作数是目标寄存器，第二个操作数是要加载的D - Form地址。
Selects the destination register for the result of the current stage identified by TextureArgument.───为由TextureArgument标识的当前贴图层的结果选择目标寄存器。
Source register and destination register should be the same.───源寄存器应当与目标寄存器相同。
The microprocessor instruction code must have some bits to identify every possible source register and destination register.───微处理机的指令代码就必须要有若干位，以便能够识别出每个可能的源寄存器和每个可能的目的地寄存器。
For each bit position, if the bit is 0, the same bit position in the destination register uses the bit from source value 1.───对于每个位位置来说，如果该位为0，那么目标寄存器中相同位的位置就会使用源值1该位的值。
If it did this, then the destination register would have to be twice as large as the source register.
" The first operand is the destination register and the second is the D-Form address to load.
Selects the destination register for the result of the current stage identified by.
For each bit position, if the bit is 0, the same bit position in the destination register uses the bit from source value 1.