armhole信息详情
n.袖孔
armholes───袖孔（armhole的复数）
air hole───气孔；河中不冰冻部分
arsehole───n.屁眼儿，肛门
wormhole───n.虫孔；蛀洞
airhole───n.风眼；[矿业]通风联络孔
asshole───n.屁眼儿，肛门；令人讨厌的人；adj.愚蠢的；窝囊的；可恶的
earhole───n.耳孔
arm holds───手握
dreamhole───梦幻洞
The armhole of the coat is too long.───这件上衣的袖孔太长了。
Fold the side seam under and cut out the armhole.───折叠侧缝线并剪下袖窿。
Armhole: Double stitches.───袖窿：双缝。
This measurement must be taken loosely, from the front shoulder point down to the armhole line, and again to the back shoulder point.───这道尺寸必须量得松一点。从前肩点开始往下量到袖窿线。
is taken in, the armhole must be correspondingly reduced by adding paper to the underarm AS shown by the shaded portion in the diagram.───若要缩小袖子，袖窿也必须做相应的缩小。用腋下加纸方法操作，如图中阴影部分显示的那样。
Pls add the fabric tape (original shell fabric) at the middle for sleeve, armhole and hood to link up the shell and lining fabric.───请在袖子，袖窿，帽顶的面料和里料中间用原身料做牵带条固定。
Objective: to transfer the neck and waist darts into a curved dart at armhole .───目的：把领省和腰省转移成袖窿处的曲省。
over pressed. There must be no glazing or impression marks on fabric especially around neck, shoulder, armhole seams and on CF.───确保衣服不能挤压，面料不能有极光和压痕，特别是领子肩部袖隆和前中。
Inspect left shoulder seam. Inspect left armhole seam for seam stretch properties and needle holes.───检查左肩缝骨。检查做袖窿缝骨。检查缝骨是否牢固及针步是否良好。
Armhole depth sleeve cap height and width as well as sleeve cap curve arc the important factors in defining modern sleeve shapes.
She tacked the sleeve of the blouse into armhole.
Inspect front right armhole seam appearance needle holes and seam stretch properties. Inspect right shoulder seam.
Front and back sleeve seams place along armhole seam, 8?
If you increase this armhole length, increase the width of the sleeve head too.
Stitch sleeves to armhole edges of fronts and back.
Instead of regular shaping at the armhole edge, the decreased stitches seem to be bolder and less frequent.
It is therefore possible to measure around an armhole curve and compare the measurement with that of the sleeve head.
Armhole ruler. Used for lapel , elbow , skirt , slack , trouser , or anywhere a special contour is needed.