cutting temperature发音

意思翻译

切削温度

相似词语短语

temperature───n.温度；体温；气温；发烧

cutting───adj.尖酸刻薄的；严寒的，刺骨的；锋利的；v.切割；凿成；剪短；把……切碎；划破（cut的现在分词）；n.剪报；插枝，插条；狭窄通道，路堑；切割，切断；割下的东西；n.（Cutting）（美、澳、印）卡廷（人名）

cutting line───切割线；截线

cutting down───研磨修整；磨掉

cutting shapes───切割形状

cutting board───n.切肉板

critical temperature───[物][电子]临界温度；n.临界温度

temperature outside───室外温度

temperature rise───[电]温升；温度上升；温度上升，温升，升温

双语使用场景

measurement system of milling transient cutting temperature is developed.───切削温度的改变。

Change in the cutting temperature.───切削温度的变化。

Then cutting temperature in high speed milling of titanium alloy TA15 was measured by an embedded semi-artificial thermocouple.───然后采用了夹丝半人工热电偶法对钛合金TA15的铣削温度进行了测量。

Cutting heat, cutting temperature and their effects are the important research contents of high speed cutting technology.───切削热与切削温度的产生和影响是高速切削技术研究的重要内容。

The highest cutting temperature point is always at face near the cutting edge.───切削温度的最高点总是位于前刀面上距离刀刃不远的地方。

Through testing the device installed in flames shot after the fire after cutting temperature are obviously different.───通过测试火焰枪在安装该装置后完成火焰切割后温度有明显不同。

Therefore, cutting temperature and volume of the two static data in shaping the course of grain it is particularly important.───因此，切削温度和静电量这两个数据在药柱整形过程中显得尤为重要。

The maximum cutting temperature increases with the increase in cutting speed.───最高切削温度随着切削速度的增大而增高。

英语使用场景

The variation of cutting force and cutting temperature Al - Si alloy cutting with diamond cutter are investigated.

The cutting temperature rise with the increase of the cutting speed, so high-speed cutting conditions should be made sure not to bum the cutting tool.

The mechanism of cutting force, cutting temperature and tool wear in the machining of quenched steel and nickel based high temperature alloy with ceramic tools are analyzed in the paper.

It is capable of displaying temperature flexuous curve, calibrating thermocouple, establishing the cutting temperature exponential formulation and predicating the state of cutting.

Tempered martensite was gradually generated as the cutting temperature increased, which is the main cause of the decrease in the hardness.