cutting mechanism发音

意思翻译

切削机构

相似词语短语

mechanism───n.机制；原理，途径；进程；机械装置；技巧

cutting───adj.尖酸刻薄的；严寒的，刺骨的；锋利的；v.切割；凿成；剪短；把……切碎；划破（cut的现在分词）；n.剪报；插枝，插条；狭窄通道，路堑；切割，切断；割下的东西；n.（Cutting）（美、澳、印）卡廷（人名）

cutting line───切割线；截线

antiasthmatic mechanism───平喘机制

cutting down───研磨修整；磨掉

cutting shapes───切割形状

cutting board───n.切肉板

coping mechanism───应对机制，应付机制

escapement mechanism───[仪]擒纵机构

双语使用场景

Developing optimum cutting mechanism is a key technology for the design of special-section shield.───开发合理的切削机构是异形断面盾构的关键技术之一。

The main structure of the cutting mechanism of the twin-shaft horizontal TMR mixer was discussed in the paper.───介绍了双轴卧式全混合日粮混合机的剪切部分主要结构。

It attains aim of comprehensively researching metal cutting mechanism with microcosm, ration, dynamic factors and so on.───达到了对金属切屑形成机理、微观、定量、动态、多项因素综合研究的目的。

9-processing any other cutting mechanism might be required by the basic design of chalk production line.───处理任何其他切削机理可能需要由粉笔生产线的基本设计。

and a latitudinal rib strip cutting mechanism disposed on the base platform corresponding to the longitudinal rib strip holding mechanism.───一横筋条裁切机构，设在所述机座平台上，并且与所述的纵筋条挟持机构相对应。

a sliding device and a stop device coordinating to the round steel cutting mechanism are also provided on the frame.───在机座上还设有与圆钢切断机构相配合的滑动装置和限位装置。

Developed countries have done much research work on high speed cutting mechanism and application.───国外已在高速切削加工机理和应用研究方面做了大量研究工作。

It was indicated by kinematic analysis that the paper cutting mechanism can meet the design requirements.───运动分析结果表明切纸机构满足设计要求。

Finally, design a special adjustable cutting mechanism for the robot according to its lawn trimming task.───最后，结合自动割草机器人的任务特点，为其设计了特制的割草机构。

英语使用场景

The design of JL 1075 combine harvester generally divide four system which include cutting mechanism system , force by wheel driving system , chain transmission and force auxiliary system.

Most renal biopsies are currently obtained using a biopsy gun, which obtains cylindrically shaped "core" samples using a rapid, spring-loaded cutting mechanism.

Another unique feature on this low vibration reciprocating saw from Hitachi is the 2-mode cutting mechanism.

In this report, an overall analysis of wellbore deviation is presented. The theoretical study in side cutting mechanism and side cutting ability of cone bits are described.

The results testified the feasibility of the cutting mechanism and showed the sequences of test factors according to the influence on cutting resistance and cutting-out rate.

This model has important meaning in analyzing the eigenfunction of the high-speed dry gear hobbing and studying the cutting mechanism.

Structures, cutting mechanism and stress wave theory of the tunneller a re presented and analyzed.

The results testified the feasibility of the cutting mechanism and showed the sequences of test factors according to the influence on cutting resistance and cutting-out ra.

This suggests that the thermally activated process in fine grain aluminum is different from the conventional forest dislocation cutting mechanism.