cutting fluid发音

意思翻译

[机]切削液；乳化切削油

相似词语短语

cutting───adj.尖酸刻薄的；严寒的，刺骨的；锋利的；v.切割；凿成；剪短；把……切碎；划破（cut的现在分词）；n.剪报；插枝，插条；狭窄通道，路堑；切割，切断；割下的东西；n.（Cutting）（美、澳、印）卡廷（人名）

fluid───n.流体，液体；adj.流动的；不固定的，易变的；流畅的，优美的；液压传动的

cutting line───切割线；截线

cutting down───研磨修整；磨掉

cutting shapes───切割形状

cutting board───n.切肉板

viscous fluid───[流]粘性流体；黏性流体

cerebrospinal fluid───[解剖]脑脊液，[解剖]脑脊髓液

cutting machine───切削机，[机]切割机；裁切机，裁剪机；截煤机；下料压力机；切削机; 下料压力机; 裁剪机; 裁切机

双语使用场景

Cutting fluid is the important related material in metal cutting process.───切削液是金属切削加工中的重要配套材料。

The cutting force can notably be deduced using the cutting fluid during machining.───在切削加工中，使用切削液能显著降低切削力。

HIGHCLEAN is a nonflammable water-soluble cutting fluid of high performance and storage durability.───HIGHCLEAN是高性能和存贮耐久性不易燃的溶于水乳化切削油。

The emulsion breaking-coagulation-photocatalytic oxidation process was used in the treatment of waste cutting fluid.───采用破乳—混凝—光催化氧化法处理废切削液。

This paper elaborates a new product --water based cutting fluid, an auxiliary material used in machinery cutting.───前言：本文介绍了在机械行业制造加工切削过程中的一种辅助材料，“新一代产品—水基切削液”。

Excellent de-emulsification property. Good separation from cutting fluid allows easier skimming.───优良抗乳化特性，容易与水溶性切削液分离，浮上液面后即可撇去。

ATS-305 Semi synthetic soluble cutting fluid is the advantage of both emulsion lubrication, and synthetic fluid stability.───ATS-305半合成水溶性切削液的好处是既有乳化液的润滑性，还有合成液的稳定性。

On current market processing aluminum alloys, customer be used to soluble oil type cutting fluid.───目前市场上加工铝及合金，普遍采用含油乳化型切削液。

By comparing with lubricating oil, the home-made cutting fluid has better performance on extreme pressure lubricant i on.───通过与润滑油的润滑性能比较发现自制切削液具有更好的极压润滑性能。

英语使用场景

A kind of transparent micro emulsion as cutting fluid consisted of surfactant, lubricant, antirust additive, stabilizer, mineral oil with low viscosity, biocide and water, etc.

BNS micro-emulsive cutting fluid consists mainly of the compound emulsifier and the compound borate as well as rust inhibitors.

The article analyzes the characteristic and the working condition of the cutting fluid using in electrical discharge machining (EDM).

The content of boric acid ester, tri ethanolamine salt of substituted benzoic acid, sodium gluconate in cutting fluid was 10%, 6%, 1%, respectively.

A kind of transparent micro emulsion as cutting fluid consisted of surfactant, lubricant, antirust additive, stabilizer, mineral oil with low viscosity , biocide and water, etc. was prepared.

This paper elaborates a new product - water based cutting fluid, an auxiliary material used in machinery cutting.

Theoretical analyses show that the cutting fluid can difficultly soak into the tool-chip interface within extremely short separating time though there is some action in the UVC process.

Others: electroplating solution, metal cutting fluid, photographic and magnetic media resist filtration.

Boric acid ester, tri ethanolamine salt of substituted benzoic acid and sodium gluconate were used as anti rust additives in water based cutting fluid.