cutting depth发音

意思翻译

切削深度，切削厚度；掏槽深度；切项度；开挖深度

相似词语短语

depth───n.[海洋]深度；深奥

cutting───adj.尖酸刻薄的；严寒的，刺骨的；锋利的；v.切割；凿成；剪短；把……切碎；划破（cut的现在分词）；n.剪报；插枝，插条；狭窄通道，路堑；切割，切断；割下的东西；n.（Cutting）（美、澳、印）卡廷（人名）

great depth───大纵深；大深度

cutting line───切割线；截线

cutting down───研磨修整；磨掉

midship depth───船中深度

cutting shapes───切割形状

cutting board───n.切肉板

axially depth───轴向深度

双语使用场景

Cutting depth can be controlled automatically adjust shades.───切割深度可自动控制调整深浅。

When I mill multiple parts out of a single plate I usually set the cutting depth so as to leave approx.───当我厂多个部分的一个单一的板我通常设置切割深度，以假约。

A useful method for adjusting the micro-cutting depth when machining holes on a round bar is presented.───介绍了一种方便实用、可在加工外圆、内孔时进行切深微量调节的方法。

Support Vector Machine is proven to be a novel approach to model the cutting depth of abrasive water jet.───支持向量机方法为磨料射流切割深度预测提供了一种可行、有效的新途径。

Because the length of wire can be made to virtually any length, the cutting depth is unlimited.───由于电线的长度可向几乎任何长度，切割深度是无限的。

With the increasing of milling rotation and the amplitude reducing, with the increasing of the cutting depth and the amplitude increasing.───并分析得出振幅随刀具转速的提高而减小，随切削深度的增大而增大。

The Influences of corneal stroma cutting depth, optical zone diameter cut and intraocular pressure (IOP) on operation result are discussed.───探讨了角膜基质切削深度、切削光区直径以及眼内压值等重要手术参数对手术效果的影响。

The limit cutting depth of the machining system with optimal controlling spindle speed is studied by experiments.───对优控主轴转速系统的极限切削深度进行了试验考证。

英语使用场景

In the geometry modeling of ball end mill cutter, consideration of cusp effect of ball milling, accurate cutting angle range corresponding to different axial cutting depth are deduced.

The system consists of initial parameter and cutting depth input, cutting force and cutting power calculation, design result output.

The influencing orderliness of the cutting depth and the rake angle of the tool on cutting qualities are found and the mathematical models are built.

The test showed that cutting depth, cutting angle and the chain blades moving speed have significant impact on the soil cutting resistance.

The characteristic of microchippings, chippings of abrasive grains, and the wear of them under different cutting depth were analysed.

Tests are conducted to find the rules how such cutting parameters as cutting depth, cutting speed and feedrate per blade as well as the cutting angle affect on the life of face mill.

Double oil cylinder and precise four-column automatic balance connecting rod structure, which can guarantee the absolutely same cutting depth of each cutting position.

A model of minimum cutting depth was proposed based on model of micro - cutting and friction coefficient.