cutting conditions发音

意思翻译

切割条件

相似词语短语

conditions───v.制约；（使）接受；（使）达到所要求的状态；（使）酿熟；（啤酒等）继续发酵；保养（皮肤、头发）；（使）健康；提出条件；给学生打需补考的分数（condition的第三人称单数形式）；n.疾病；条款；先决条件（condition的复数）；n.（生活或工作等的）条件；（影响某事发生的）物质环境；（天气、地面等的）情况

cutting───adj.尖酸刻薄的；严寒的，刺骨的；锋利的；v.切割；凿成；剪短；把……切碎；划破（cut的现在分词）；n.剪报；插枝，插条；狭窄通道，路堑；切割，切断；割下的东西；n.（Cutting）（美、澳、印）卡廷（人名）

exophthalmic conditions───眼球突出症

live conditions───生活条件

cutting line───切割线；截线

pathogenic conditions───致病条件

cramped conditions───狭窄的环境

general conditions───一般条件；一般条款；普通保险条款

cutting down───研磨修整；磨掉

双语使用场景

In addition to part program corrections, editing can also be done to optimize the cutting conditions of the machining cycle.───除了部分程序更正，编辑也可以进行对切削条件下加工周期的优化。

The paper presents the machinability of crystal materials, and emphasizes the influence of cutting conditions on the mirror finish.───探讨晶体材料的切削加工性，重点分析切削条件对实现镜面车削的影响。

In the designing of Modular Machine Tool, choosing cutting conditions and calculating spindle parameters are very important tasks.───在组合机床设计中，切削用量选择和主轴参数计算是一项非常重要的工作。

then , predicting the optimum performance and validating the optimum cutting conditions by using a confirmation experiment.───预测经最优切削参数加工得到的表面粗糙度值，最后通过确认实验验证了其正确性。

Curvature and radius of curvature of central wheel are solved and non end cutting conditions of actual profile of central wheel are deduced.───对中心轮理论廓线的曲率和曲率半径进行了解析，并由此确定中心轮实际齿廓避免顶切条件约束。

According to cutting conditions, the workpiece surface was regarded as adiabatic boundary, thus the model of heat source was established.───本文将铣削过程中的热源看成是一个移动线热源，根据切削条件将工件表面看成绝热边界，建立了热源模型。

This article mainly discusses the method of how to get the optimized cutting conditions for milling operation on the machining center.───这里主要讨论了在加工中心上的铣削加工中，求取优化的切削用量的方法。

Better cutting conditions, have a good cutting surface, pumping stretching rod, line.───更好的切削条件，有良好的切削表面，抽伸棒、线。

Then presenting the flow chat of program and the actual example of how to get the optimized cutting conditions for milling in detail.───详细给出了求取优化的铣削切削用量的程序框图和实际例子。

英语使用场景

Some essential rules for the application of coated carbide tools are proposed, and a typical example is chosen to show the optimization of the cutting conditions of a coated carbide tool.

An experimental study is presented to investigate the effects of cutting conditions on kerf geometry with variable process parameters.

The maximum stress point moves to compressive stress, depended on the experimental data, when negative rake angle substituted for positive one and other cutting conditions kept fixed.

Under different cutting conditions, the damage on the surface of a material is different. We consider that damage layers on near perfect crystal consist ...

Curvature and radius of curvature of central wheel are solved and non end cutting conditions of actual profile of central wheel are deduced.

From the theoretical model proposed in this work, the surface prole can be deduced from cutting conditions, cutter geometry, cutting tool imperfections and milling machine deviations.

The paper presents the machinability of crystal materials, and emphasizes the influence of cutting conditions on the mirror finish.

The cutting temperature rise with the increase of the cutting speed, so high-speed cutting conditions should be made sure not to bum the cutting tool.