crankshaft pin信息详情
曲轴销
crankshaft sprocket───n.曲轴链轮;轴承链轮;曲轴正时炼轮
pin───n.大头针,别针,针;栓;琐碎物;引脚;vt.钉住;压住;将……用针别住
dentine pin───牙本质钉
pin nailer───钉钉机
scarf pin───围巾夹针
oar pin───桨销
pin maudo───固定销
firing pin───[军]撞针;撞针; 击针
sear pin───[体]击发阻铁轴
Based on the analysis of plastic flow law in crankshaft forming, the cause of typical forming defects, i. e. the folding existing in the crankshaft pin and crank arm was found out.───通过模拟分析曲轴成形的塑性流动规律,找出了大型船用曲轴曲拐成形过程中的典型缺陷连杆颈和曲柄臂外侧折叠的成因。
This pin allows the connecting rod to follow the motion of the crankshaft.───这个别针允许连接杆跟随曲轴的行动。
rod is attached at one end to a crankpin on the crankshaft and at the other end to a piston, through a piston pin or wrist pin.───连杆的一端与曲轴的连杆轴颈相连,另一端通过活塞销与活塞相连。
Research on the Motion Model of the Grinding of the Crankshaft Pin───曲轴连杆颈磨削运动模型的研究
Based on the analysis of plastic flow law in crankshaft forming, the cause of typical forming defects, i. e. the folding existing in the crankshaft pin and crank arm was found out.
- constant depth flume
- cut the rope remastered
- conductor casing
- could you help me with english
- convex tread
- continuous gust
- cross road blues
- culryf
- crankshaft press
- conductor configuration
- constant depth screw
- coregonus peled
- convex weld
- cross roads
- culsageeite
- crankshaft pulley
- could you help me with me
- cut the stone
- continuous handling
- constant deviation
- corejarring machine