crystallization rate信息详情

crystallization rate发音

意思翻译

结晶速率

相似词语短语

crystallization───n.结晶化;具体化

crystallization definition───结晶定义

adductive crystallization───加成化合物的结晶分离操作

rate───n.(Rate)人名;(法、塞)拉特;n.比率,率;速度;价格;等级;vi.责骂;被评价;vt.认为;估价;责骂

crystallization simulation───结晶模拟

fractional crystallization───[岩]分离结晶;[冶][晶体]分步结晶;分馏结晶作用;分级析晶;分级结晶; 分级析晶; 分离结晶; 分离结晶作用

crystallization setup───结晶装置

crystallization dish───结晶皿

crystallization of pla───聚乳酸结晶

双语使用场景

of PET/GF composite with good mechanical properties and rapid crystallization rate was prepared.───了结晶速率快、力学性能优异的玻纤增强聚对苯二甲酸乙二酯(PET/GF)。

PBT exhibits good chemical stability, fast crystallization rate and excellent processing property.───PBT本身具有化学稳定性好、结晶速度快、加工成型方便等优势。

of the introduction of APP, PP/APP′s equilibrium melting point rose slightly and crystallization rate rose markedly.───引入APP后,PP/APP复合材料的平衡熔点升高,结晶速率大幅度提高。

The experiment results indicate that the crystallization rate could be reduced by decreasing the prepolycondesation temperature.───实验结果表明,通过降低缩聚初期的温度,可显著减慢聚酯的结晶速度。

The crystallization kinetics of copolyester indicated that the maximal crystallization rate temperature is below than that of PET.───结晶动力学研究表明共聚酯的最大结晶速率出现的温度与PET相比向低温区转移;

How to promote the crystallization rate and decrease annealing temperature has been one of the hottest scientific research areas at present.───如何提高非晶硅薄膜的晶化速度和降低晶化温度是当前的研究热点之一。

The isothermal crystallization kinetics indicate that the graft group can accellerate the crystallization rate of PP, and doesn't . . .───等温结晶动力学的研究表明接枝物结晶的成核方式不发生改变。

The crystallization rate increases with increasing PC content if the blends are crystallized from the melts.───而从熔体结晶时,体系的结晶速率随着PC含量的增加而增加。

The spherulitic growth rate and isothermal crystallization rate of PEG or PLLA were influenced when the other component was added.───当其中一成分的增加会影响PEG或PLLA的球晶成长和等温结晶的速率。

英语使用场景

A new chloroprene rubber which has high mooney viscosity and high - crystallization rate is introduced here.

The results showed that the crystallization rate of the solidified flux was only 5%, and the main crystallized mineralogical phases were wollastonite and with a little nepheline .

Compared with pure polyolefin , nucleated polyolefin showed a higher crystallization temperature and a faster crystallization rate.