corrosion rate发音

意思翻译

[化学]腐蚀速率

相似词语短语

corrosion───n.腐蚀；腐蚀产生的物质；衰败

corrosion science───[化学]腐蚀科学

corrosion protection───[材]防腐；防腐蚀，腐蚀保护

neutralize corrosion───中和腐蚀

bisulfide corrosion───二硫化氢腐蚀

rate───n.(Rate)人名；(法、塞)拉特；n.比率，率；速度；价格；等级；vi.责骂；被评价；vt.认为；估价；责骂

fretting corrosion───摩擦磨蚀；接触腐蚀；接触腐蚀，摩擦腐蚀; 磨蚀

corrosion suede───防腐麂皮

corrosion resistant───耐腐蚀的，抗腐蚀

双语使用场景

example of swimming pool wall the conditions for performing corrosion rate measurements were not ideal.───案例里的游泳池池壁的腐蚀速率测试环境不理想。

The results show that the corrosion rate gradually reduces with the increase of experimental time.───研究结果表明，随着试验时间的延长，腐蚀速率逐渐降低。

Conversion of a metal surface to a less reactive state. A process to reduce corrosion rate of metal surfaces.───一种可以降低金属表面活性的转化膜，能够降低金属表面腐蚀几率的工艺。

Corrosion rate of aluminum alloy half-immersed in electrolyte with time was similar with that of sample immersed entirely in electrolyte.───铝合金半浸于电解液中的腐蚀速率随时间的变化趋势与全浸于溶液中相似。

The results revealed that the corrosion rate of steel being used for pharmaceutical machine had been reduced in a very big degree.───结果表明：制药机械用钢材的腐蚀率大大降低。

Due to this fact it was possible to conduct the corrosion rate measurements by means of GalvaPulse equipment.───基于这样的事实，使用GalvaPulse测试腐蚀速率是可行的。

At low and moderate temperatures, corrosion product films might be destroyed by liquid flow, inducing high corrosion rate.───在中低温区形成的腐蚀产物膜容易被流体破坏，导致了高的腐蚀速率。

At the same corrosion environment, the corrosion rate of naphthenic acid drops with the increase of its molecular weight.───腐蚀环境相同时，环烷酸的腐蚀速率随着环烷酸分子量的增加而降低。

英语使用场景

In this case there is a rather good correlation between resistance, half-cell potential and corrosion rate mapping.

The effects of parameters such as variability in dead and live load and corrosion rate are studied.

Corrosion rate of mild steel under wet dry alternate conditions by means of 0.

The relationship of the corrosion rate of steel and the resistance of concrete was studied to characterize the macrocell corrosion of reinforcement in the concrete containing chloride.

A linear polarization method was applied to measure corrosion rate of reinforcing bar of concrete in situ.

The numerical characteristics of transverse member corrosion rate is estimated probabilistically based on the thickness measurement data of bulk carriers on active service in COSCO.

In general, the corrosion rate of the alumina refractory and the chrome refractory in the iron phosphate melts was not higher than their corrosion rate in the DWPF melt.

The corrosion rate of carbon steel in the prefilming solution was monitored by an on line measurement system consisting of a coulostatic pertubation meter and a micro computer.

The potentodynamic scanning method can determine the corrosion rate and screened inhibitor quickly and simply.