contact failure发音

意思翻译

接触断裂

相似词语短语

contact───vt.使接触，联系；n.接触，联系；vi.使接触，联系

failure───n.失败; 失败的事/人; 没做到; 故障; 破产; 歉收；n.失败；故障；失败者；破产

business failure───经营失败；[经管]企业破产；[经管]企业倒闭

failure notice───系统退信；发送失败通知

boot failure───自举失败；启动故障

contact nsles───联系nsles

intimate contact───亲密接触；密切接触

personal contact───身体接触；私下交往；人际关系

mechanical failure───[机]机械故障

双语使用场景

It should take effective measures to prevent the organic compounds volatizing contact interfaces, which could cause electric contact failure.───应采取有效措施防止有机物挥发进入接触界面造成的电触点失效。

electric contact failure, most of which are caused by dust particles in the atmosphere, widely exists in electric equipments nowadays.───电接触故障在电子设备中大量存在，其中大部分都与大气中的尘土颗粒有关。

Under the action of multiple stresses, contact failure is the main failure mode of aerospace electrical connectors.───在温度和振动等综合应力的作用下，航天电连接器的主要失效形式为接触失效。

The electric contact failure, most of which are caused by dust particles in the atmosphere, widely exists in electric equipments nowadays.───电接触故障在电子设备中大量存在，其中大部分都与大气中的尘土颗粒有关。

The Relation Between the Effects of Electric Contact Failure on Signal Transmission and the Frequency of Signal Transmission───电接触故障对信号传输的影响以及与信号频率的关系

A Brief Analysis of the social Contact Failure of Middle school students in the countryside───浅议农村中学生的社交障碍症

Effect of Electrical Charges Carried by Dust Particles on Electric Contact Failure───尘土颗粒带电对电接触故障的影响

The Supersonic Inspection on Contact Failure of Axle Wheel Seat───车轴轮座接触不良的超声波检测

The Combined Model for Predicting the Contact Failure Based on the Probability Distribution and the Series Analysis───基于概率分布和时间序列的接触失效组合预测模型

英语使用场景

Dust contamination is one of the major causes of electric contact failure.

The contamination on contact surfaces was found to be one of the main reasons to cause electric contact failure by analyzing lots of gold plated contacts in failed mobile phones.

It is found that electric contact failure of coaxial connector is one of the most important factors causing high error code rates in communication systems.

A considerable portion of electric contact failure is caused by environmental factors, of which dust contamination is an important factor on electric contact reliability.

However, when these hard probes are used for fritting contact process, aluminum debris adheres to the probes and the contact failure occurs after several hundred contacts.