corrosion fatigue发音

意思翻译

[材]腐蚀疲劳

相似词语短语

corrosion───n.腐蚀；腐蚀产生的物质；衰败

corrosion science───[化学]腐蚀科学

corrosion protection───[材]防腐；防腐蚀，腐蚀保护

fatigue coronavirus───疲劳冠状病毒

epididymitis fatigue───附睾炎疲劳

neutralize corrosion───中和腐蚀

bisulfide corrosion───二硫化氢腐蚀

fretting corrosion───摩擦磨蚀；接触腐蚀；接触腐蚀，摩擦腐蚀; 磨蚀

corrosion suede───防腐麂皮

双语使用场景

To do Corrosion Fatigue tests and analyses of typical Components of aircraft, the Compilation of aircraft.───要进行飞机典型构件的腐蚀疲劳试验和分析，就必须编制飞机载荷-环境谱。

Corrosion fatigue is one of the main factors damaging the structures of reinforced concrete.───腐蚀疲劳是钢筋混凝土结构破坏的主要因素之一。

The result indicated that the springs fail because of corrosion fatigue fracture.───结果表明，该弹簧断裂为腐蚀疲劳断裂。

Corrosion fatigue. A type of failure that results from the simultaneous action of a cyclic stress and chemical attack.───腐蚀疲劳：由循环应力和化学腐蚀同时作用导致的一类失效。

The impact of essential influential factors, including corrosion, fatigue and maintenance, has been considered in reliability context.───基于总纵极限强度的可靠性分析中考虑了腐蚀、疲劳和维修等主要因素的影响。

To reduce the corrosion and stress can avoid or moderate the corrosion fatigue and prolong the lifetime of the bellows service.───通过降低腐蚀和波纹管应力可以防止或减轻腐蚀疲劳发生，延长波纹管使用寿命。

The corrosion-fatigue influence factor was obtained by corrosion-fatigue test on the same specimens.───通过腐蚀疲劳试验测定了腐蚀疲劳影响系数；

The S135 drill pipe steel was selected as the research object in the paper; the oxygen corrosion and corrosion fatigue be.───本文选用S135钻杆钢作为研究对象，进行钻杆钢的氧腐蚀和腐蚀疲劳行为研究。

In this paper, the failure mechanism and design criterion of corrosion fatigue are explained.───阐明了腐蚀疲劳失效的机理及腐蚀疲劳失效设计准则；

英语使用场景

It comes to the conclusion that the corrosion fatigue fracture of LC4 aluminum alloy is the results of combined action of anodic dissolution, hydrogen embitterment (HE) and mechanical damage.

The main mechanical failure of the eccentric wheel handspike planetary transmission due to corrosion fatigue and traverse disruption caused by periodic contact press.

A study on the prediction of corrosion fatigue life has been carried out by applying the crack propagation rate formula for fatigue to corrosion fatigue.

Such a small stress imposed on the low-pressure long turbine blade combined with its evitable corrosive environment contributing to the corrosion fatigue effect.

So, the sucker rod's main failure modes are fatigue fracture and corrosion fatigue crack.

Fractograph and microstructure analyses with scanning electron microscoy (SEM) and optical microscoy (OM) were conducted to determine the corrosion fatigue crack initiation and propagation mode.

The results showed that the intermediate tie rod was fractured by corrosion fatigue.