cold worked发音

意思翻译

冷作；冷加工

相似词语短语

worked───adj.发展过的；技术娴熟的；v.工作；从事于……；（使）干活；在……从事活动；运转（work的过去式及过去分词）

worked on───影响，对…起作用；继续工作；从事于…；设法说服

worked as───担任；以…身份而工作

worked last───最后一个工作

cold───adj.寒冷的；冷淡的，不热情的；失去知觉的；adv.完全地；n.寒冷；感冒

worked up───adj.异常兴奋；十分生气；激动的，生气的

worked out───v.被算出，据计算；adj.采空的；采空的；被算出，据计算

worked hard───努力学习；辛勤工作

worked wonders───创造奇迹；产生奇妙作用

双语使用场景

Cold worked reinforcement loses more strength than hot rolled bars.───冷处理钢筋比热处理钢筋丢失更多强度。

results show that the stress and strain distribution around the cold worked hole are similar between the model and real object.───结果表明：带衬套挤压和不带衬套冷挤压时孔边载荷的分布，模型材料与原型实际挤压结果相似；

Hot rolled stainless steel bars that are annealed and cold worked to produce a higher surface quality and higher strength.───经过退火及冷加工的热轧不锈钢棒材，其表面质量更高，强度也更高。

The relief of some of the internal strain energy of a previously cold-worked metal, usually by heat treatment.───冷塑性变形金属释放其部分应变能的过程叫回复，通常采用热处理的方法。

The primary purpose of annealing is to soften hard steel so that it may be machined or cold worked.───退火的主要目的是使坚硬的钢软化以便机加工或冷作。

When cold-worked the hardness is greatly increased.───当被冷却之后，金属的硬度会大大提高。

For welding in cold-worked areas, the minimum bending radii (e. g. according to DIN 18800) shall be observed.───在冷加工区的焊缝，应满足最小弯曲半径（如根据标准DIN18800）。

英语使用场景

For cold worked products, the tensile strength levels at temperature as specified in Table 17 apply.

Recrystallized microstructure and mechanical properties of cold worked brass annealed by electropulsing and routine annealing were studied.

Solution treatment is helpful to meliorate the electrochemical property and to improve the electrochemical stability of the cold worked material in corrodent medium.