compressive force发音

意思翻译

压缩力

相似词语短语

compressive───adj.压缩的；有压缩力的

compressive strength───[力]抗压强度；[力]压缩强度；耐压强度

compressive sensing───压缩传感

force───n.力量；武力；军队；魄力；n.(Force)人名；(意)福尔切；(英、法)福斯；vt.促使，推动；强迫；强加

coulombic force───库仑力

employ force───[法]采用武力

opponents force───反对势力

occupying force───占领军

striking force───击球力量；[体]击球发力

双语使用场景

Results: The longitudinal continuous dynamic compressive force of SMC was 163.88n.───结果：天鹅接骨器纵向持续动态加压力为163.88 N。

Usually the compressive force is in the form of hammer blows using a power hammer or a press, as shown in Fig. 4.1.───通常压力都是以由如图4.1所示的动力锤或压力机提供的锤击形式出现。

longer the single drill pipe, the lesser the critical compressive force of drill stem.───钻杆的单根长度越长，钻柱所能承受的临界载荷越小。

The probe can be penetrated into a coating until the bottom part of the coating through the compressive force effect of the feeler arm.───探测杆在压力作用下促使探针刺入涂层直至涂层的底部。

Press forgings. Press forgings use a slow squeezing action of a press, to transfer a great amount of compressive force to the workpiece.───压锻通过压力机缓慢的挤压动作将巨大的压力传递给工件。

this workpiece is held between the centers of the lathe, If the centers exert a compressive force against the work.───如果这个工件在放在车床中心之间，中心车床对工作产生压力。

If this workpiece is held between the centers of the lathe, the centers exert a compressive force against the work.───如果此工件是夹持在车床的两端顶尖之间，那么顶尖就对工件施加一股压缩力

If this work piece is held between the centers of the lathe, the centers exert a compressive force against the work.───如果工件是被夹在车床中心之间，这些中心会对工件施加压缩力；

英语使用场景

Thus, Myosin II - dependent compressive force is necessary for normal MT bundling in the growth cone neck.

Some embodiments are configured to ascertain the amount of compressive force that is being applied to the tissue while the thickness of the tissue is being determined.

In this paper, the internal force and displacement of body of the coke drum which is suffer from temperature stress and inner compressive force are talked about.

After distraction was removed, immediate compressive force was measured. The specimen was then placed in a loading frame to simulate head weight.

These thrusts are an expression of compressive forces, which shorten the crust.

They are designed to create resistance to a compressive force.

The calculational method for plant cell compressive force was (obtained) that was convenient for theoretical analysis and numerical calculation.

Usually the compressive force is in the form of hammer blows using a power hammer or a press, as shown in Fig. 4.1.

The calculational formula for cell compressive force was (obtained) expressed by cell girth and by node coordinate and displacement of plant cell mechanical models.