compression zone发音

意思翻译

压缩区，压缩带；受压部

相似词语短语

compression spring───压缩[压紧]弹簧；[机]压缩弹簧

Zone───n.(Zone)人名；(塞)佐内；vi.分成区；n.地带；地区；联防；vt.使分成地带；环绕

compression stockings───压缩丝袜

compression test───[力]抗压试验；[试验]耐压缩试验；压力试验; 压缩试验; 抗压强度试验; 抗压试验

chest compression───胸外按压

compression fracture───受压骨折；压缩断裂；压缩骨折

compression pants───紧身裤

asphyxial compression───窒息性压迫

unconfined compression───无侧限抗压强度；无侧限压缩

双语使用场景

Based on the plane hypothesis, a set of formulas were derived for the design of RC beams with very small depth of compression zone.───对RC梁正截面设计公式进行了深入的研究，根据平截面假定推出了受压区高度很小时梁配筋量计算的公式，并与规范公式进行了比较。

For concrete in compression zone a stress-strain relation for repeated axial compressive cyclic loading, is adopted instead of that for reversed loading.───对混凝土受压区采用轴向重复加载的应力-应变关系而不是反复加载的。

The geochemical element association shows the features of deep fault shear and compression zone.───具有深部断裂剪切、挤压带地球化学元素组合特征。

California crumbles into the sea even though it is in a compression zone where the land is rising.───即使加州是个压缩地带，会有陆地升起，但还是碎裂沉到了大海之中。

In compression zone bolt force of end-plate connections distribut triangularly, when designing calculating the force model can be referred .───端板连接受压区螺栓受力呈三角形分布，设计时可参考本文受力模型计算。

It discusses the difference to height of compression zone and secondary moment.───深入讨论了各调幅建议在处理受压区高度和次弯矩上的分歧；

the influence of cracks in shear-compression zone of concrete due to stirrup corrosion on shear strength of beam is quite large;───剪压区箍筋锈蚀所产生的锈胀裂缝对试验构件抗剪强度的影响很大；

Short Period Rigidity and Deflection of Beams with Bonding Steel Plate in Compression Zone───压区粘钢加固钢筋混凝土梁的短期刚度与挠度

Effect of short-term rigidity on precast reinforced concrete beam of side stuck steel in compression zone───预制钢筋混凝土梁受压区侧面粘钢对短期刚度的影响

英语使用场景

In compression zone bolt force of end-plate connections distribut triangularly, when designing calculating the force model can be referred .

In this code, it assumed that the compression zone in the gusset plate was divided into three zones under the pressure, and the stability of each zone was calculated as an axial compression member.

The utility model relates to a diatomite blank-making machine. On auger blades, the inner walls of a compression zone, a releasing zone and a blank out port are attached with plastic lining plates.

Compressive strength reduction in compression zone is one of the main factors which affect surplus bearing capacity of corroded reinforced concrete eccentric compressive components.