clearance fit发音

意思翻译

间隙配合；动座配合；活动配合

相似词语短语

fit───vt.安装；使……适应；使……合身；与……相符；adj.健康的；合适的；恰当的；准备好的；vi.符合，配合；适合；合身；n.合身；发作；痉挛；n.(Fit)人名；(捷、罗)菲特

clearance hole───穿通孔，出砂孔；排屑孔；（铸件的）出砂孔，（板牙的）排屑孔径

clearance event───清关（外贸术语）

clearance jobs───清关工作

diffusive clearance───扩散间隙

security clearance───n.（对参加秘密工作人员等进行的）忠诚调查; 安全调查; 参与机密的资格; 安全级别（此级别涉及某人可以获得哪些保密信息，哪些不可以，可以进入哪些安全保密设施，哪些不可以。）；忠诚调查；安全调查

clearance sales───n.清仓削价销售( clearance sale的名词复数 ); [经] 出清存货，大贱买，销售底货

promoter clearance───启动子清除

fit notes───调整注释

双语使用场景

In the rotating ring components, a rotating ring 3, an auxiliary seal ring 2 and a transmission seat 1 are assembled together by clearance fit.───旋转环组件中旋转环3、辅助密封圈2和传动座1之间采用过盈配合装配在一起。

magnetic sleeve (6) is sheathed on the outside surface of the support tube and is in clearance fit with the support tube.───套在支承管外表面的磁性套筒(6)与支承管间隙配合。

When machining parts with bore as positioning reference, if clearance fit positioning is adopted, machining accuracy is certainly affected due to the existence of clearance.───在精加工以内孔为定位基准的零件时，所用芯轴类工装如果采用间隙配合定位，由于定位间隙的存在，必然影响零件的加工精度。

In all cases of clearance fit, the upper limit of the shaft is always smaller than the lower limit of the mating hole.───在所有的间歇配合案例里，轴的上限总是要比配合孔的下限要小。

A magnetic sleeve (6) is sheathed on the outside surface of the support tube and is in clearance fit with the support tube.───套在支承管外表面的磁性套筒（6）与支承管间隙配合。

Clearance fit can be used between outer ring and housing as the load has a constant direction relative to the outer ring .───外圈与轴承座之间可以用游隙配合，因为相对于外圈的负荷方向恒定。

Can counterclockwise unscrewing the grip the lock nut and adjust control again, until the nut spin twist clearance fit.───可以逆时针拧松握把根部的锁紧螺母，再左右旋拧调整螺母，直到间隙合适为止。

When the fit between bearing and housing is clearance fit, the bearing's outer ring has anti-rotation ball (pin).───当轴承与轴承座为间隙配合时，轴承外圈带止动球（销）。

RAILWAY MATERIAL IN GENERAL. FINISHED CLEARANCE FIT BOLTS.───通用铁路设备.动配合用精加工配合螺栓

英语使用场景