calcination temperature发音

意思翻译

煅烧温度

相似词语短语

calcination───n.煅烧；[化工]焙烧；烧矿法

temperature───n.温度；体温；气温；发烧

calcination kiln───煅烧窑

calcination bone───煅烧骨

calcination is───煅烧

calcination test───煅烧试验

calcination unit───煅烧装置

calcination define───煅烧定义

critical temperature───[物][电子]临界温度；n.临界温度

双语使用场景

of calcination temperature, content of nickel and molybdenum on the selective hydrogenation performance of catalyst were investigated.───载体焙烧温度、金属镍与钼的负载量对催化剂选择性加氢性能的影响。

The suitable process system, such as calcination temperature and calcination time etc. has been found out.───出合适的煅烧温度、煅烧时间等工艺制度。

The flux dosage and calcination temperature, which affect luminosity of the fluorescent powder, are the major controlling factors.───激活剂用量和煅烧温度影响荧光粉的发光亮度，是主要控制因素。

This study, through different calcination temperature and calcination time to elect the best of phosphorus adsorption swelling vermiculite.───本研究，通过不同的煅烧温度和煅烧时间选出对磷吸附效果最好的膨胀蛭石。

A mild calcination temperature and a higher carbonation temperature favored the process and the maximal capture capability could be higher.───温和的煅烧温度和较高的吸收温度下，吸收剂的最大转化率比较高；

In a proper range, increasing the additive dosage and calcination temperature could improve the leaching rate of Au and Ag.───在适当范围内增加添加剂的用量和提高焙烧温度，均有助于金银浸出率的提高；

The results showed that the amount of surface defects and the microstructure of photocatalyst changed with the calcination temperature.───结果表明，焙烧温度能引起特定的缺陷数目变化，改变了光催化剂的微观结构。

The results showed that concentration of the catalyst, calcination temperature had some influences on photo catalytic properties.───结果表明，催化剂的浓度和焙烧温度对光催化性能有一定影响。

XRD and IR were used to analyze the effect of different calcination temperature on phase composition of the precursor.───采用XRD和IR分析不同灼烧温度对前躯体物相组成的影响。

英语使用场景

The influence of the calcination temperature on the catalytic activity of zeolitefor the reaction of o-xylene isomerization was investig.

The influence of the calcination temperature on the catalytic activity of o - xylene isomerization was investig.

The influence of the calcination temperature on the catalytic activity of zeolitefor the reaction of o-xylene isomerization was investigated.

In this paper, the effects of calcination temperature, holding time and content of dolomite on the strength and expansion rate of cement mixed with calcined dolomite are investigated.

The maxim strength is found when calcination temperature is 600 ℃.

The lower calcination temperature compared with other methods can avoid growing and reuniting of powders temperature.

Of pore silica gel, calcination temperature should not exceed 200 ℃.

The pore volume and specific surface area of the samples decreased with the increasing calcination temperature.