butyl acrylate信息详情
丙烯酸丁酯
butyl caulk───丁基填缝料
butyl rubber───丁基橡胶,异丁(烯)橡胶;丁基橡胶;异丁橡胶
butyl acetate───[有化]乙酸丁酯;醋酸丁酯;醋酸丁酯,乙酸丁酯
butyl cellosolve───[建] 丁基溶纤剂,丁氧基乙醇
butyl alcohol───[有化]丁醇;酪醇(等于butanol)
butyl flashing tape───丁基防水胶带
acetic acid butyl ester───乙酸丁酯,醋酸丁酯
Three latex magenta couplers were formed by emulsion copolymerization of these monomers and butyl acrylate.───这些单体与丙烯酸丁酯共聚得到了三种乳液聚合型品红成色剂。
Two polymerization systems were studied, which were styrene(St)-M12 system and butyl acrylate(BA)-M12 system.───研究了苯乙烯—M12和丙烯酸丁酯—M12两个反应体系。
The poly macromer was copolymerized with butyl acrylate in benzene to form the graft copolymer.───研究了聚甲基丙烯酸甲酯大单体与丙烯酸丁酯在苯中的共聚。
The graft-copolymerization of butyl acrylate onto gelatin was carried out in aqueous medium using ceric ammonium nitrate as redox initiator.───在本文的这部份中,研究了以硝酸铈铵为引发剂在明胶上接枝丙烯酸丁酯的反应条件。
Vinyl acetate and butyl acrylate as mixed monomer can be used to prepare high solid content water based white emulsion.───以醋酸乙烯及丙烯酸丁酯为混合单体来制备高固含量水基白乳胶。
The title water resistant silicone-modified vinyl acetate-styrene-butyl acrylate terpolymer is prepared by seed-emulsion polymerization.───通过种子乳液聚合法制备了有机硅改性的醋酸乙烯酯-苯乙烯-丙烯酸丁酯(醋苯丙)三元共聚防水乳液。
Styrene-butyl acrylate copolymer was synthesized and its behaviors as solid phase microextraction (SPME) adsorbent were studied.───合成了苯乙烯-丙烯酸丁酯共聚物,研究了此聚合物作为固相微萃取吸附质的性能。
The copolymerization emulsion of Vinyl acetate(VA) and Butyl acrylate(BA) was synthesised by batch process and semi-continue process.───采用半连续法和间歇法合成了醋酸乙烯酯、丙烯酸丁酯共聚乳液。
Acrylic rosin sucrose polyurethane (ARSPU) was synthesized from rosin, sucrose, ethylene glycol, butyl acrylate and isocyanate prepolymer.───以松香、蔗糖、聚丙烯酸酯及异氰酸酯预聚体等为原料,合成了一种单组分聚氨酯清漆。
High performance quadripolymer latex for waterborne anti-corrosive paint is synthesized by use of butyl acrylate, styrene, acrylonitrile and acrylate acid.
The effect of butyl acrylate ( BA ) dosage on adhesive was investigated.
Through this mechanism, multiblock polystyrenes and polystyrene-block-poly(butyl acrylate) copolymers containing various narrow polydispersity blocks can be prepared.
The polyacrylate sizes were prepared in ethanol through a free radical copolymerization of butyl acrylate (BA) with acrylic acid(AA), methacrylic acid(MAA) and itaconic acid(IA), respectively.
High speed cigarette adhesive was prepared from vinyl acetate butyl acrylate acrylic acid terpolymer emulsion.
Phragmoplast of coil coating has been prepared by free radical polymerization and by using acrylic acid, methyl methacrylate, butyl acrylate as the raw materials.
The degraded starch and acrylamide - butyl acrylate copolymer have been produced.
The copolymer latex of butyl acrylate and VAE was prepared by interpenetrating polymer networks ( IPN ) method.
The poly macromer was copolymerized with butyl acrylate in benzene to form the graft copolymer.
- centrifugal forming
- canucks
- cafe paulista
- carburetors
- channel contraction
- caulking
- butyl aldehyde
- case assy
- centrifugal gas cleaner
- cameron rhodes
- canup
- chelate stability
- cafe pod
- carburets
- channel control
- caulking chisel
- butyl amine
- centrifugal gas compressor
- case back case
- chelate stabilizer
- cameron scott