butt weld发音

意思翻译

对接焊缝；对头焊接

相似词语短语

unfitness of butt weld───焊缝对口错边量

butt───n.(Butt)人名；(英)巴特；(俄、德、印、巴基)布特；n.屁股；烟头；笑柄；靶垛；粗大的一端；vt.以头抵撞；碰撞

fillet weld───角焊缝，填角焊，贴角焊

butt out───别管闲事；不必多嘴

autogenous weld───气焊

weld together───焊接在一起

butt plug───肛门插

gouged weld───福利

weld wheels───焊接车轮

双语使用场景

Weld the outer side member with a full butt weld under shielding gas.───用气体保护全对接焊，焊接外侧梁。

weld can be divided into four types: butt weld, fillet weld, plug weld and end weld.───焊缝可分为对接焊缝、角焊缝、塞焊缝和端接焊缝四种。

fatigue resistance of the scarf weld in the end of the vessel is stronger than that of the butt weld.───部斜面焊缝结构的抗疲劳强度比对接焊缝结构高，且不会发生一次性脆性破坏；

Check whether the butt weld is smooth; there is any mismatch, or any other weld problem.───目视检查焊接处是否平整，两边是否有错位。以及是否有虚焊、焊脱现象。

The assembly deviation butt weld of has line on the part of the middle, the light is different on the sides of linear.───组对偏差的对接焊缝其焊缝偏中间区域会出现线条，线条两侧的亮度不同；

By the analysis and measures above, it improves the test quality of the process piping butt weld effectively.───通过以上分析和采取的措施，能有效提高工艺管道对接焊缝超声波检测的质量。

Reducing long radius butt weld elbows shall be kept to a minimum.───应尽量少用长径异径对焊弯头。

Dimensions - End-to-end dimensions for butt weld , two-way, globe- type, straight pattern control valves.───尺寸。对接焊接，两向，球型，垂直模式控制阀的末端对末端尺寸。

The other size and end connection - butt weld, socket weld and thread are available upon request.───其它尺寸及接口型式-承插焊，套焊及螺纹等可接受订购

英语使用场景

This article introduced the experiment of residual stress in flat tubeplate head of large scale fuel boiler that was manufactured by cold rotary extruding and butt weld.

Buckling of thin plate due to butt weld was investigated using inherent strain method as an equivalent load.

Manganese burn - off from the wire in welding a single - V butt weld was studied.

Temperature and residual stress field of industrial pipe butt weld was simulated by ABAQUS codes.

This indicated that the fracture had initiated at the unfused butt weld in the longitudinal stiffener.

Buckling of thin to butt weld was investigated using inherent strain method as an equivalent load.

Butt weld and flanged valves have the same end - to - end dimensions for Class 300 and up.

The butt weld is easier to inspect non destructively than the fillet welds.