center hole发音

意思翻译

[计]中心孔；顶尖孔；中心炮眼

相似词语短语

hole───vt.凿洞；vi.凿洞，穿孔；（高尔夫球等）进洞；n.(Hole)人名；(瑞典、挪)霍勒；(英)霍尔；n.洞，孔；洞穴，穴；突破口

center───n.中心，中央；中锋；中心点；vi.居中，被置于中心；adj.中央的，位在正中的；n.（Center）森特（人名）；vt.集中，使聚集在一点；定中心

drilling hole───钻孔

through hole───透眼，透孔，通孔

castellation hole───蜂窝孔

he hole───he洞

weepers hole───泄水孔

jackson hole───杰克逊霍尔（地名）

last hole───[体]最后一穴

双语使用场景

When machining shaft parts, always machining center hole, and then to the center of the center hole for the processing of the outer surface.───如加工轴类工件时，总是先加工中心孔，再以中心孔为基准加工外圆表面。

I first drilled the center hole in both plates in order to index them together.───首先，我钻出中心孔在这两个板块在以指数他们在一起。

Some methods are put forward to assure the quality of center hole through the analysis of center hole's effect on finishing quality.───针对中心孔质量对零件加工质量的影响进行了分析，提出了几种保证中心孔质量的方法。

Fatigue tests were carried out on the limited width specimen with center-hole.───对有限宽中心带孔拉伸试样进行疲劳试验。

So the tensile fatigue tests of the limited width specimen with center-hole were performed for studying the correlation.───所以本文对有限宽板中心带孔试件进行了拉伸疲劳试验，用以研究这种相关性。

The results show that the center hole had obvious effect for the separation of TMG and NH3.───分析结果表明中心孔对于TMG和NH3的分隔作用明显。

The optical media includes a disc substrate (36) having a formatted su*ce (38) and a center hole (42).───所述光学媒体包括一带有格式化表面（38）和中心孔（42）的*基体（36）。

Aperture fan-shaped inlet design with center hole.───带中心孔的间隙扇形分隔进口设计。

They may be sealed and filled by some working liquid or the end near the center hole are open the screw itself may also be a heat pipe.───销可以是全部密封的内部充填一定数量工作液的热管，也可以伸入到中心孔内端是敞口的，螺杆本身也可做成“热管”。

英语使用场景

The fatigue behaviours of Superalloy GH901 under major combined with minor cycle have been systematically studied at room temperature using smooth specimen and sheet with center hole.

Put in the drawbar to the spindle shaft center hole.

The classification of center hole and its range of application are briefly introduced.

The nickel stamper is then cut to the appropriate diameter along with punching a center hole used to center the stamper in the moulding machine.