chamber furnace发音

意思翻译

室形炉；箱式炉；分室炉

相似词语短语

furnace───n.火炉，熔炉

chamber───n.(Chamber)人名；(英)钱伯；n.（身体或器官内的）室，膛；房间；会所；adj.室内的；私人的，秘密的；vt.把…关在室内；装填（弹药等）

electric furnace───电炉；电阻炉

council chamber───n.会议室

gas chamber───n.毒气室

furnace stove───火炉

air chamber───n.气囊，气胞; 气室

exchequer chamber───财政会室法院，理财法院

cupel furnace───灰吹炉，提银炉

双语使用场景

The article discussed improving all kinds of methods to improve temperature uniformity of chamber furnace, pit furnace, salt bath furnace, fuel furnace.───本文主要介绍了提高热处理箱式电炉、井式电炉、浴炉和燃料炉炉温均匀性的各种技术方法。

Taking the automotive rear axle gear as an example, the design and adjusting of nitrogen-based atmosphere carburizing process were conducted on the new-built mult-purpose chamber furnace.───以汽车后桥齿轮为实例，在新制造的箱式多用炉上进行了氮基气氛渗碳淬火工艺的设计、调试和检测。

Generally, the steel rolling furnace's service life is 3-10 years, the wrought steel chamber furnace is about 2 years, and the soaking pit side nozzle furnace's is 3-6 years.───轧钢加热炉的使用寿命一般为3 ~ 10年，锻钢室式加热炉的寿命约为2年，单侧上烧嘴均热炉的使用寿命一般为3 ~ 6年。

Fit time and feat technique parameters rise to the quantity of the chamber furnace establishment to go to close the important function.───合适的时间及适宜的技术参数对炉膛建立的质量起着至关重要的作用。

Design and Adjusting of Nitrogen-Based Atmosphere Carburizing Process for a New Mult-Purpose Chamber Furnace───新箱式多用炉氮基气氛渗碳淬火工艺的设计与调试

Numerical simulation of transport process in air uni-regenerative chamber furnace───空气单蓄热室状加热炉内传输过程的数值模拟

Baking process model and numerical simulation for the chamber furnace───室状加热炉烘炉过程数学模型及其数值模拟

英语使用场景

Taking the automotive rear axle gear as an example, the design and adjusting of nitrogen-based atmosphere carburizing process were conducted on the new-built mult-purpose chamber furnace.

The physical parameters that characterize the fouling dynamics of the water wall surfaces of the chamber furnace when its heat load varies are determined.

The article discussed improving all kinds of methods to improve temperature uniformity of chamber furnace, pit furnace, salt bath furnace, fuel furnace.

Measuring method can be used for a single chamber furnace only.

Generally, the steel rolling furnace's service life is 3-10 years, the wrought steel chamber furnace is about 2 years, and the soaking pit side nozzle furnace's is 3-6 years.