abrasive paper信息详情

abrasive paper发音

意思翻译

[机]砂纸

相似词语短语

abrasive───n.研磨料;adj.粗糙的;有研磨作用的;伤人感情的;(声音)刺耳的,难听的

abrasive cloth───[机]砂布;研磨布

abrasive blasting───(磨料)喷砂法,喷砂;(磨料)喷砂法;[机]喷砂

abrasive wear───磨料磨损; 磨蚀;[机]磨损;[机]磨料磨损;磨蚀

abrasive wheel───[机]砂轮;磨轮;磨轮,砂轮

paper───n.(Paper)人名;(俄)帕佩尔;vi.贴糊墙纸;发交通违章传票;vt.用纸糊;用纸包装;adj.纸做的;n.纸;论文;文件;报纸

epipharyngeal abrasive therapy───咽上研磨疗法

abrasive cleaning agents───磨料清洗剂

e paper───n.电子报

双语使用场景

For safe adhesion of the rubber slightly sand the blade's rim with abrasive paper.───为橡胶的安全的粘附稍微沙片的与粗糙的论文的边界。

As the glass abrasive paper is used, the effect of ageing is prominent.───在采用玻璃砂纸时,时效处理更显出其良好效果。

Repair or replace the electric brush; clean the commutator surface by abrasive paper and blow it clean.───修理或调换电刷,用木砂纸清理整流子表面,并吹净。

Equipped with a set of both square and round automatic dry abrasive paper sticking machines to make the sticking more convenient and fast.───配备方形与圆形干磨砂纸自动粘贴器各大一套,使得干磨砂纸粘贴更加快捷;

Allow a day for the mold to dry out . Separate the mold from the glass carefully . Finish the top surfaces with abrasive paper(240grit)───让模具风干一天。小心地把模具从玻璃分离。用砂纸(240砂度??太专业了,不懂)完成表面部分。

waterproof abrasive paper made of aluminium oxide───氧化铝水砂纸

waterproof abrasive paper made of silicon carbide───碳化硅防水砂纸

Paints and varnishes - Determination of resistance to abrasion - Rotating abrasive-paper-covered wheel method───涂料和清漆。耐磨性的测定。旋转磨擦纸盖轮法

Coated abrasives: Abrasive cloth, abrasive paper, abrasive belt, abrasive disc, flap disc, abrasive sleeve───涂附磨具:砂布、砂纸、砂带、砂盘、研磨页轮、砂套

英语使用场景

Smooth down with a fine abrasive paper.

Rub the table down with a fine abrasive paper before painting it.

When hardened, smooth down with abrasive paper, then seal with plaster primer.

This resembles a cylinder lawnmower, and drives a drum to which sheets of abrasive paper are fitted.

You can do this by hand with abrasive paper and a sanding block.

Sand the surface with abrasive paper until no flakes of paint stand proud of the surface.

Once hardened, the repair can be shaped flush with a plane and chisel, before a final finish with abrasive paper.

Use two coats, rubbing down with fin abrasive paper between.

Rub down with fine abrasive paper.