testing method发音

意思翻译

检测方法；试验法

相似词语短语

testing───adj.试验的；棘手的；n.[试验]测试；v.测验；考查；受考验（test的ing形式）

method───n.方法；条理；类函数

flakiness testing───片状试验

astigmatic testing───像散测试

mechanical testing───机械试验法

fuzz testing───模糊测试

chlorite testing───绿泥石测试

testing equipment───测试设备，试验设备；测试设备；试验设备

paternity testing───亲子鉴定；亲系试验

双语使用场景

such stories exist, but a reliable testing method does not.───此类案例层出不穷，但却没有可行地试验方法。

We found a simple operating testing method of the resilience performance of hanser named petal shape weighting.───我们发现了一种简单可行的对马尾衬布变形回弹性进行测试的一种方法。

This is an old testing method of Travis's hair and skin.───这是一个古老的试验方法，特拉维斯的头发和皮肤。

However, for manufacturers, there is no much difference in the production process and testing method from that of common air filters .───然而制造厂家对其的生产和检测流程与普通过滤器没有大的差别。

Specifications should be very clear for the vendor . The testing method and allowed tolerances should be indicated .───卖主对产品的规范说明必须非常清晰。测试方法和允许的误差必须显示。

Magnetic particle testing is a non-destructive testing method for detection of imperfections on or just below the surface of ferrous metals.───磁粉探伤是一个非或略低于黑色金属表面缺陷检测的无损检测方法。

And the same testing method has been used to test experimental samples.───并用同样的测试方法测试实际的产品。

We look around the day testing method, it has a certain degree of feasibility, but there are limitations that affect the accuracy.───纵观日测法，它既有必不退的可行性，但是也有必不退局限性，感化鉴别的不确率。

The nondestructive testing method for cemented carbide anvil is one of the important means for quality assurance.───硬质合金顶锤质量的无损定量检测，是保证顶锤质量的重要手段之一。

英语使用场景

A single - rate testing method is presented for shortening the velocity - testing time of the strap down gyroscopic.

A testing method to determine light oil content in lubricating oil by closed flash point determinator is introduced.

Frisian of the "river hydrology testing method", Faurel in the "lakes-Lake Geneva, " Ma special book like "water sports" such as hydrology monographs were published.

A simple testing method of wear resistance for piston ring and cylinder sleeve is introduced.

The dynamic testing method of a prestressed continuous box bridge, the testing result and the analysis of the dynamic coefficient are presented.

If the adjustment parameter is overfull, this testing method is difficult of carry out.

Reseeding is a built-in self-test(B. IST) testing method, which is used to improve fault coverage of pseudo-random testing.

Q BD testing method is described.

In this paper a practicable testing method for frame rigidity is described. The method is aimed at checking the finite element model of frame structure analysis.