strain hardening发音

意思翻译

机械（加工，应变）硬化

相似词语短语

hardening───v.硬化；使强壮（harden的ing形式）；n.硬化；淬火；锻炼

strain───n.(Strain)人名；(英)斯特兰；n.张力；拉紧；负担；扭伤；血缘；vi.拉紧；尽力；n.（植物、动物的）品种；种类；vt.拉紧；滥用；滤去；竭力

dispersion hardening───弥散硬化

hardening point───[机]硬化点

hag strain───和应变

hardening of───硬化

fearful strain───可怕的紧张

groin strain───腹股沟拉伤

precipitation hardening───[机]析出硬化；淀积硬化；淀积[脱溶]硬化

双语使用场景

Due to the effect of strain hardening, higher amount of cold deformation resulted in superior room temperature strength and inferior torsion ductility.───由于加工硬化效应的影响，随着冷拔变形量的增加，合金丝材的室温强度增加，扭转塑性下降。

The steel reinforcement is represented by a bilinear strain hardening model.───钢筋以双线性应变硬化模型表示。

The model includes the effect of strain rate sensitivity, strain softening and strain hardening.───该模型包括了应变率敏感性效应，应变软化效应和应变硬化效应。

When it accumulated to a higher degree, the specimen began to shear and dilate after a short time of strain hardening.───达到一定程度后，岩石表现出短暂的应变硬化，岩石开始剪胀。

The results show that the stress-strain relationship of geotextile-reinforced fillings is of strain hardening.───试验表明：加筋填料的应力–应变关系表现为应变硬化型；

The PP with high grafting rate can improve the melt strength and the extensional viscosity of a PP system and the strain hardening.───接枝率高的PP，可提高PP体系的熔体强度和拉伸黏度及其应变硬化。

Thirdly, plastic strain ratio and strain hardening index are the two key parameters of material's formability.───塑性应变比与应变硬化指数是评价板料成形性能的两个重要参数。

The strain hardening rate of the material in various aging states is also increased by this addition, wh.───强化颗粒的加入还显著提高了材料在各种时效状态的加工硬化率。

Iron and steel - Method of determination of the tensile strain hardening exponent n of steel sheet and plate.───钢铁.钢薄板和板材拉伸应力硬化指数n的测定方法

英语使用场景

When it accumulated to a higher degree, the specimen began to shear and dilate after a short time of strain hardening.

A material with plastic prestrain shows the property of strain hardening such as isotropic hardening, kinematic hardening or mixed hardening.

The load point displacement caused by single load for two dimentional cracked body with certain strain hardening exponent is divided into its linear-elastic and plastic components.

The yield conditions and calculation parameters of compressive strain hardening soils, and of dilative strain hardening soils are obtained through tests whose rationality is approved by the computed ...

They can only be strengthened by cold working ( also called strain hardening ).

The main factors such as pressure, the third invariant of stress tensor, strain hardening and softening, stain rate and tensile damage have been taken into account in the constitutive model.