wire feeding发音

意思翻译

喂丝

喂线

相似词语短语

feeding───n.饲养；吃；输送；adj.供给饲料的；摄取食物的；v.饲养（feed的ing形式）

wire───vt.拍电报；给…装电线；vi.打电报；n.(Wire)人名；(英)怀尔；n.电线；金属丝；电报

feeding time───喂养时间；供料时间

feeding tube───[医] 饲管

feeding ground───食物区；聚食场（鸟类、鱼类或野生动物）

scaphopoda feeding───肩胛动物饲养

feeding america───养活美国

ctenophore feeding───草鱼摄食

No feeding───禁止喂食

双语使用场景

Adopting digital control technology controlled the wire feeding motor.───采用数字化控制技术对送丝电机进行控制。

The wire feeding system realized interface with the digital welding source.───送丝系统的数字化可实现与数字化焊接电源的接口。

Besides, the stability of the wire-feeding system influence the surface quality of processing work piece directly.───走丝系统的稳定性直接影响加工工件的表面质量。

The stability of arc voltage may be improved by H-bridge driving circuit used for wire feeding system.───这大大减小了电机的惯性，将其用于送丝系统将有望提高电弧电压的稳定性。

The method may be applied satisfactorily to the determination of aluminium in ladle aluminium-calcium packed wire feeding.───方法可用于测定铝钙包芯线中铝含量，结果令人满意。

The system consists of guide wire feeding and detecting, force feed back, imaging and image processing etc.───此系统主要由导丝进给与检测装置、力反馈装置、成像及图像处理设备等组成。

Each of the coated wires may be controlled alone and the wire feeding channels are provided with compressed air.───每根包芯线可以单独控制。在喂线通道通有压缩空气。

The experiments on desulphurization with Mg bearing cored wire feeding in ladle are carried out in this paper.───报道了钢包喂含镁包芯线脱硫工艺研究的结果。

英语使用场景

The present paper introduces the process route of LD converter Ar blowing and wire feeding slab continuous caster TMCP for producing Q345C low alloy and high strength structural steel plate.

Two PI adjusters were applied for wire feeding velocity control, one performed motor armature voltage feedback, the other one executed arc voltage feedback to determine the given velocity.

The pulsed voltage, oscillating wire feeding and short current are adjusted synchronously.

Usage: special equipment for auto starting motor armature flat wire coil automatic wire loading, automatic wire feeding, automatic alignment, automatic cutting off and automatic shape making.

Round wire feeding options, only under the wire diameter, and wire types irrelevant.

To guarantee good quality of butt laser welding with filler wire, a gap width detecting sensor and a wire feeding system has been designed.

Usage: special equipment for auto starting motor armature round coil automatic wire loading, automatic wire feeding, automatic alignment, automatic cutting off and automatic shape making.

The system consists of guide wire feeding and detecting, force feed back, imaging and image processing etc.

A pulsed - wire feeding machine for underwater welding has been developed.