test bench信息详情
试验台;[试验]测试台
bench test───台架试验,试验台试验;[车辆]台架试验;小型试验(比实验室大,比中型试验小)
bench───n.长凳;工作台;替补队员;vt.给…以席位;为…设置条凳;n.(Bench)人名;(英)本奇;(德)本希;(丹)本克
wooden bench───木制长凳
bench cushions───靠垫
bench vice───[机]台钳;老虎钳;台虎钳,台用虎钳
footboard bench───踏板长凳
bench vise───钳工台虎钳;[机] 台钳
weight bench───举重床;重量训练椅座
conoid bench───圆锥台
The test bench could meet test requirements for mass production because of its advanced technology level.───该测试台技术先进,可满足批量生产的产品检测要求。
The paper firstly presents the structure of IGCT test bench and its two cabinets for high-voltage producing and test circuit.───文章首先讲述了IGCT测试台的结构组成,分别设计了用于高压产生和高压测试的两个机柜。
Swing shaft test bench is used to test alignment, calibration and accuracy of system under simulating swing condition in laboratory.───摇晃轴试验台是在实验室模拟摇晃条件下,对被试系统进行对准、标校及精度试验的一种装置。
In the Object Test Bench window, right- click the rounded rectangle representation of the object whose method you want to call .───在“对象测试工作台”窗口中右击表示您想调用其方法的对象的圆角矩形。
Cause: The project which contains the class on which Object Test Bench is being invoked might not be set as StartUp Project.───原因:该项目包含调用对象测试工作台所针对的类,但可能没有设置为启动项目。
You will not be able to perform an object operation in Object Test Bench until you rebuild to refresh.───只有重新生成以刷新对象测试工作台,才能在对象测试工作台中执行对象操作。
The Object Test Bench menus do not display the function if the function takes a variable parameter argument.───如果函数接受变量参数,则对象测试工作台菜单不显示该函数。
Finally, the performance of the thrusters has been tested using dynamometer test bench and a circulating water channel.───配合动力测试平台以及水槽实际量测,验证模拟分析结果及推进器之性能。
After comparing the diagnosis results with measured values from a test bench, this method is proved to be viable.───将诊断结果与实测结果进行比较后,证明此方法是可行的。
- what never was
- store time time
- yes they are strong
- things punk
- take somebody something
- store tour
- take somebody to
- spring lake park
- supper cola
- winter ghosts
- unsteadies
- winter gift
- things real
- transient recorder
- water inlet tunnel
- what never you go
- water inlet pipe
- to place an order
- unsteady ablation
- water inlet value
- spring lamination