sand inclusion发音

意思翻译

夹砂；砂眼

相似词语短语

inclusion───n.包含；内含物

sand───n.沙；沙地；沙洲；沙滩；沙子；vt.撒沙于；以沙掩盖；用砂纸等擦平或磨光某物；使撒沙似地布满；给…掺沙子；vi.被沙堵塞；n.(Sand)人名；(英、德、意、芬、罗、捷、挪)桑德；(瑞典)桑德；(法)桑

inclusion meaning───包含意义

inclusion definition───包含定义

inclusion rider───附加条款

inclusion quotes───包含引号

inclusion myositis───包涵体肌炎

sand table───沙盘；[矿业]矿砂摇床

sand hills───[地理]沙丘；[地名] [美国] 桑德丘陵

双语使用场景

When using in moulding sand, it can promote oriental solidification of castings and prevent burn-on and sand inclusion of castings, and improve roughness of castings.───在铸造生产中可以促进铸件的方向性凝固，防止粘砂、夹砂等铸造缺陷和改善铸件表面粗糙度。

The sand inclusion glass fiber reinforced plastic pipe takes thermosetting resin as base body, take glass fibre and its products as reinforced material.───玻璃钢夹砂管道(以下简称夹砂管)是玻璃纤维与合成树脂及石英砂的复合体。

The reasons causing sand inclusion and slag inclusion are: ( 1 ) gaps between mould and core prints or cods too small;───前言： 湿砂型铸铁件产生砂孔和渣孔缺陷的主要原因是：（1）芯头或砂台的间隙偏小；

convrter of shaping sand inclusion surface non-2, smooth, affecting the quality of products.───制做的热压整形模表面不光洁，砂眼较多，影响产品质量。

Construction of Heavy-Calibre Glass Reinforced Plastic Pipes with Sand Inclusion in Soft Ground───大口径玻璃钢夹砂管在软土地基中的施工

Analysis of Sand Inclusion Defect of Speed Transmission Housing Cast with EPC Process───消失模变速箱体砂眼缺陷分析

Sand Inclusion of Iron Castings and Its Prevention───铸铁件的砂眼及其防止

英语使用场景

Vertical leakage-proof technique is critical in vacuum preloading treatment for improving consolidation of soft clay sediment subsoil with deep sand inclusion.

Utilizes the balanced coagulation technology solution plate class casting the entrapped slag, the sand inclusion, flaws and so on blowhole, improves the casting quality, reduces rejection rate.

The sand inclusion glass fiber reinforced plastic pipe takes thermosetting resin as base body, take glass fibre and its products as reinforced material.

The causes to such defects as cracking and sand inclusion in the integral rear draft lug and the body center plate filler are analyzed, and the technology improvement measures are described.

Analysis is done to the causes of reject A30 block with sand inclusion, i. e. the elements of molding sand feature; cast structure, casting speed and arrangement for casting system, etc.