shims发音

意思翻译

n.[机]垫片；填隙用木片；夹铁（shim的复数形式）

v.用木片或夹铁填孔隙（shim的第三人称单数）

相似词语短语

oh my gosh───哦，我的天啊

collectorship of port new york───纽约港收藏家

ba shi───巴希(地名)；桥（日语）

barberry bushes───理发灌木丛

bat fowling shakespeare definition───捕蝙蝠莎士比亚的定义

waders for fishing───钓鱼用的涉禽

fishskin clothing───鱼皮服装

off broadway shoes───非百老汇鞋款

so short───这么短

gunshot wounds───火器伤；枪伤

双语使用场景

Then we can duplicate lots nickel copy shims from this origination by electronic froming.───然后我们可以复制首创电子一株地段镍从这个副本垫片。

Toyota has told dealers that it can produce as many as 120,000 of the shims a day.───丰田已告知其经销商，它一天最多能生产12万片这一垫片。

They may be paired in any required arrangement without adjusting shims.───他们可能在任何需要的配对安排不调整垫片。

steering pump and the amount of assist is tailored to each driver, usually at the beginning of the season, via different shims in the pump.───转向泵和数额的援助是针对每个驱动器，通常是在本赛季开始，通过不同的垫片的泵。

You can use shims with a large number of previously incompatible applications to quickly and easily get them to work.───您可以快速大量以前不兼容的应用程序，以使用垫片和轻松地获得他们的工作。

All special tools including shims etc. , which are required for installation and maintenance shall be supplied with the equipment.───所有特殊工具，包括垫片等，所要求的安装和维修应提供与设备。

The initial retrofit consisted of removing the gaps between the stringer flange and floor beam by providing shims.───最初的修复工作是通过垫片来消除纵梁翼缘和横梁之间的间隙。

Install differential case and dummy bearings in axle housing (without shims) and tighten retaining cap bolts.───在轴壳内（没有垫片）安装差速箱和模型轴承，并紧固固定帽螺栓。

The high vertical stiffness is achieved by having thin layers of rubber reinforced by steel shims .───垂直方向的坚硬度是因为有钢板垫片支撑着簿的橡胶压层。

英语使用场景

Absorbing materials combined with shims are used for filling the absorbing chamber, it makes the structure of the system more sample, the manufacture and repairing cost cheaper.

Shims, a type of flat washer, can be manufactured in many different shapes from Carbon Steel, Blue Temper Spring Steel, Brass, Aluminum, Stainless Steel, and Copper.

Position the shims and striker on the ( GOP ) and install the bolts.

With individual adjustment, each bearing arrangement is adjusted separately using nuts, shims, spacer sleeves, deformable sleeves etc.