turn indicator发音

意思翻译

转数计

相似词语短语

indicator───n.指标，标志，迹象；指示器；[试剂]指示剂；[计]指示符；压力计

indicator variable───指标变数，指标变量；[统计]指示变量

flushness indicator───平齐度指示器

indicator constant───指示剂常数

turn turn turn───转身，转身

leading indicator───领先指标

refinement indicator───精化指标

lagging indicator───[统计]滞后指标；迟滞指标；拉后指标；滞后经济指标，落后指标，拉后指标

freshness indicator───新鲜度指示器

双语使用场景

If flow rate is in excess of that specified, turn indicator towards closed position, noting pressure drop and valve setting and determining new flow rates from flow rate chart.───如果流量超过规定，将指示器旋转到关闭位置，注意压降和阀门设置，并从流量表中确定新的流量。

Loosen scale retaining ring and remove turn indicator assembly.───松开刻度固定环，拆卸旋转指示器总成。

Loosen the scale retaining ring and rotate the turn indicator scale to align with the " 0 " on the handwheel. tighten the scale retaining ring by hand. do not overtighten.───松开刻度上的固定环，旋转指示器刻度使其对齐手轮上的「 0 」 。用手紧固刻度上的固定环。不要过紧。

Remove handwheel and turn indicator sleeve by grasping the handwheel and pulling away from the valve body along the stem.───拆卸手轮，并通过抓住手轮旋转指示器套筒，将其沿着阀杆从阀体内拉出。

Carefully remove the handwheel and turn indicator sleeve assembly, leaving the valve at its balance set point.───小心拆卸手轮，并旋转指示器套筒总成，将阀门保留在它的平衡设置点上。

Loosen the scale retaining ring and rotate the turn indicator scale to align with the "0" on the handwheel.───松开刻度上的固定环，旋转指示器刻度使其对齐手轮上的“0”。

Righ front turn indicator failure.───右前方向指示灯出现故障

Right rear turn indicator failure.───右后方向指示灯出现故障

Left front turn indicator failure.───左前方向指示灯出现故障

英语使用场景

Loosen scale retaining ring and remove turn indicator assembly.

If flow rate is in excess of that specified, turn indicator knob towards closed position, noting pressure drop and valve setting and determining new flow rates from flow rate chart.

Carefully remove handwheel and turn indicator sleeve assembly, leaving the valve at its balance set point.

With wrench, turn indicator to open position on indicator plate. Do not force past this point.

If flow rate is in excess of that specified, turn indicator towards closed position, noting pressure drop and valve setting and determining new flow rates from flow rate chart.

Reinstall turn indicator assembly. Scale retaining ring should be hand - tight Do not over tighten.

Remove handwheel and turn indicator sleeve by grasping the handwheel and pulling away from the valve body along the stem.

Loosen the scale retaining ring and rotate the turn indicator scale to align with the "0" on the handwheel.