turbine wheel发音

意思翻译

轮机转子；[动力]涡轮机叶轮

相似词语短语

wheel───n.车轮；方向盘；转动；vt.转动；使变换方向；给…装轮子；vi.旋转；突然转变方向；盘旋飞行

pelton turbine───水戽式[冲击式]水轮机；水轮机；培尔顿水轮机；水斗式水轮机

candent turbine───坎登特涡轮机

steam turbine───n.蒸汽轮机; 汽机；汽轮机；蒸汽轮机；蒸汽透平

turbine blade───[动力]涡轮叶片，透平叶片

wind turbine───[动力]风力涡轮机；风轮机，风力涡轮机

big wheel───弗累斯大转轮，大观览车；具有影响力的人

abrasive wheel───[机]砂轮；磨轮；磨轮，砂轮

decagram wheel───十克轮

双语使用场景

The results show that because of tensile stressproducted in their environment and working process, the gas turbine wheel cracks under the action of stress corrosion.───结果表明，由于叶轮所处环境及工作过程中所受的拉应力作用，风机叶轮在应力腐蚀作用下开裂。

An internal-combustion engine consisting essentially of an air compressor, a combustion chamber, and a turbine wheel that is turned by the expanding products of combustion.───一种内燃机，主要包括一空气压缩机、一燃烧室和一涡轮机，通过使燃烧的生成物膨胀而驱动。

In addition, improper heat treatment process and welding defects promotes the destruction trend in the gas turbine wheel.───另外，热处理工艺不当以及焊接缺陷是造成叶轮失效的促进因素。

On this particular turbocharger turbine wheel I used the inner races of two ball bearings to prevent the shaft from moving axially.───关于这一特定的涡轮增压器涡轮我用站内的两个球轴承，以防止轴轴向移动。

The research of turbine wheel assembling die mechanical movement analysis───涡轮叶轮组合模具机械运动分析

Preform Optimization of Die Forging Process of a Turbine Wheel Based on Rigid Visco-plastic FEM Simulation───基于刚粘塑性有限元模拟的汽轮机叶轮模锻的预成形优化

Research on Offset Turning Processing for Bottom Circle of Hydraulic Turbine Wheel───水轮机转轮下环偏车工艺的研究

Control-grain Cast Processing for Integral Turbine Wheel of Superalloy───高温合金整体叶轮控晶铸造工艺研究

英语使用场景

The mechanical properties of fine grain cast and conventional cast integral turbine wheel were evaluated.

In addition, improper heat treatment process and welding defects promotes the destruction trend in the gas turbine wheel.

On this particular turbocharger turbine wheel I used the inner races of two ball bearings to prevent the shaft from moving axially.

The vibration standard system puts into the use may enhance vibrates the sensor the examination, the test precision and the turbine wheel electric power facility reliability.

The results show that because of tensile stressproducted in their environment and working process, the gas turbine wheel cracks under the action of stress corrosion.

A control - grain cast processing for integral turbine wheel of superalloy using mould agitation was successfully investigated.

An internal-combustion engine consisting essentially of an air compressor, a combustion chamber, and a turbine wheel that is turned by the expanding products of combustion.