shell plating发音

意思翻译

[船]船壳板；船壳板列；外壳列板；外壳板

相似词语短语

shell───vt.剥皮；炮轰；n.壳，贝壳；炮弹；外形；vi.剥落；设定命令行解释器的位置

gold plating───[化工]镀金；镀金，馏金

turret plating───转台电镀

plating technician───电镀技师

plating process───电镀工艺

plating rack───[化工]电镀支架

plating styles───电镀风格

plating technology───电镀工艺

shell startup───shell启动

双语使用场景

Opening in the shell plating, deck plating etc. to be rounded and reinforced where necessary.───船壳板、甲板等处必要的开孔应圆滑并进行加强。

Many people go to a metal detection research department, tested the watch shell plating thickness, the equipment they use a strong radiation experiment was completed, remove the case again, bad!───曾经有人去一家金属研究检测部门，做过手表壳的镀金厚度检测，他们用的那个设备有强烈的射线，实验刚结束，取出表壳再一看，坏了！

Before delivering the ship to the owner, how do you paint the shell plating?───交船前怎样对船体外板进行油漆？

The shell plating, where holed, was temporarily repaired by covering a doubler and building up a cement box.───船壳板洞穿处用复板及水泥箱作了临时性修理。

The port &std side shell plating amidships was discovered to have obvious signs of being repaired.───船舯部左、右船壳板发现有明显的修理痕迹。

Thus a point is reached where there will be no actual rupture of shell plating, but severe dishing of plating will occur over a large area.───因此在这种情况下虽然舰底壳板很可能并不会破裂，但却会造成大范围的凹陷。

The shell plating in way was seriously corroded and densely pitted.───该处船壳板严重腐蚀并密集着锈斑。

The torpedo hit tore a hole 10 meter long and 6 meter high in the shell plating and caused 5 dead.───鱼雷在她的装甲板上撕开了一个10米长6米高的大洞，并造成5名水兵死亡。

Developing and Application on Plating Technology of Bearing Shell Plating-Layer───轴瓦镀层电镀技术的研究与应用

英语使用场景

The ship's shell plating was broken during loading in bad weather due to the collision with the large steel barges , laden with logs, staying alongside the port side of the ship.

Before delivering the ship to the owner , how do you paint the shell plating?

Dimensions of shell plating acc. to regulations of the classification society with reinforcements in way of penetrations and shell openings where required.

The shell plating in way was seriously corroded and densely pitted .

High-quality optical lens, aluminum alloy shell plating, small size, rapid give off heat, low power, long life, easy installation, bigger adjustment range of projection angle.

The thickness of upper shell plating should be increased in way of the break.

Thus a point is reached where there will be no actual rupture of shell plating, but severe dishing of plating will occur over a large area.