shell flange信息详情
外板缘材
flange───n.[机]法兰;[机][古生]凸缘;轮缘;边缘;vt.给…装凸缘
shell───vt.剥皮;炮轰;n.壳,贝壳;炮弹;外形;vi.剥落;设定命令行解释器的位置
blind flange───盲板;堵塞法兰;盖板; 闷头法兰
flange bolts───突缘螺丝
flange plumbing───法兰管道
mounting flange───定位凸缘;[机]安装用法兰;支承法兰;固定法兰
shell startup───shell启动
flange tool───法兰杆
flange dots───凸缘圆点
Tightness test both the shell and tube sides of the exchanger to check that the flange gaskets are holding tight.───紧力测试对热交换器的管程与壳程,检查法兰垫圈是否紧密。
When the flange vessel pattern has not been able to satisfy the above requirements in the check of the pressure vessel shell, then this requirement should be marked in the pattern.───当法兰所在容器图样对容器壳体的检验要求未能满足上述要求时,则该要求在图样中标明。
This paper focuses on the effects of the distributed bolts and bolt-holes on the shell flange-end bending stress, and suggests a more practical calculation model on shell-end stress.───本文着重分析了离散分布的螺栓及螺栓孔对筒体端部应力的影响,对筒体端部的应力计算提出了一个更接近实际的计算模型。
The issue achieved a pressure vessel shell flange welding edge effective processing, to solve the shell flange hole processing problems.───本课题实现了压力容器简体焊接法兰坡口的有效加工,解决了简体法兰孔的加工问题。
Gasket for equipment shell flange shall be selected by the following table.───设备法兰用垫片根据下表选择
Failure Analysis for the Shell Flange Cracking of a Heat Exchanger───换热器壳侧法兰开裂失效分析
Shell flange of channel end───管箱侧壳体法兰
Shell flange of cover end───盖侧壳体法兰
Then multiple factor analysis of OSC, including the thickness of outer shell, flange plate and web plate of T-shaped members, with or without ribbed stiffeners, is carried out.
- take account of sth
- principal bond
- warm water pond
- tracking sheet
- tiny brain
- social worker
- sticklegends
- tracking signal
- shell frame
- thermel
- salt poisoning
- spiritual level
- shell fungus
- principal book
- will be done
- turbine drum
- unicorn
- seedless vascular plant
- the image of the city
- take acting lessons
- unicorn blocker