thermal load发音

意思翻译

[动力]热负荷；[力]热应力

相似词语短语

load───vi.[力]加载；装载；装货；vt.使担负；装填；n.负载，负荷；工作量；装载量

thermal paste───热胶

thermal energy───[能源]热能；温热热能法，热能专业

thermal shock───温度急增，[核]热冲击；热冲击，温度急增

thermal trip───热断路装置；热敏断路；热脱扣器；热[双金属]断路装置

thermal plant───热电厂；[电]火电厂

thermal inertia───热惰性，热惯量，热惯性；热惰性；[热]热惯性（温升速率的倒数）；[热]热惯量

thermal properties───热性质；热力性质；热特性

thermal mugs───保温杯

双语使用场景

Then, its indicator diagram, mechanical load and thermal load are analyzed.───同时对示功图、机械负荷和热负荷进行了分析。

This paper describes a multiple controller for a boiler thermal load system.───介绍了一种用于锅炉热负荷系统的复合控制器。

influence of water temperature variation on thermal load on dam body.───水温度变化对坝体温度荷载的影响。

Thus, does the reduce protein growth under conditions of heat stress as a means of reducing the thermal load?───如此，在特定热应激条件下减少蛋白合成意味着降低热负荷？

Half of the thermal load of a super-insulated home is due to heat losses through ventilation.───高隔热住宅的一半热负荷都归因于通风造成的热量损失。

After testing the temperature of the cylinder and cylinder -head , we have achieved the goal of greatly improving the thermal load .───实测气缸盖，气缸温度场表明，达到了明显改善风冷柴油机热负荷的目的。

To adapt to the test of batch production, we established the thermal load automatic testing system.───为适应批量生产的测试要求，我们建立了热负载自动测试系统。

According to thermal load characteristic of Chaoyang district, this paper puts forward the proper boiler installation scheme.───本文根据动力区朝阳地区热负荷的特点，提出了适合其的装炉方案。

Surface crack has little influence to temperature field. Crack tip forms high tensile stress under the thermal load. 5.───表面裂纹缺陷对制动盘温度场的影响很小，裂纹尖端在热载荷作用下形成较大的拉应力。

英语使用场景

The factors of influencing the thermal load and thermal stress at the peril point of hot forging die were analyzed.

Analyzed are factors affecting thermal load on air-cooled diesel engines and governing law of its variation and matching of thermal load with cooling system.

An experimental study has been conducted of the thermal load distribution in a tangentially fired boiler furnace with burners installed at the four corners of the boiler.

Adding the stillwater load, thermal load and wave-making load to the above extreme response, the extreme total load expected to occur in a certain number of wave encounters is evaluated.

This is achieved by using a unique multi beam technology, demonstrated in figure 2, which reduces the power density, minimizes the thermal load, and reduces the kerf width in the wafer.

The thermal load is the main reason which causes damage of hot forging die.

The fatigue crack under thermal load extension is analyzed in this paper.