temperature region信息详情
温度区域
temperature───n.温度；体温；气温；发烧
region───n.地区；范围；部位
localities region───地区
apical region───[医]心尖区
antebrachial region───前臂区
critical temperature───[物][电子]临界温度；n.临界温度
temperature outside───室外温度
temperature rise───[电]温升；温度上升；温度上升，温升，升温
disordered region───无序区
can automatically measure temperature distribution of thermal spots and looks for the maximum temperature region of a thermal spot.───可自动测量热斑的温度分布及寻找热斑的最高温度区域；
At the phase transition temperature region, the pyroelectric response changes its polarity with time, indicating the two phases coexistence.───在相变温度范围，发现热释电响应随时间改变极性，表明晶体中两相共存。
At high temperature region close to the transition point, by considering the higher-order effect, theoretical values are in accordance with the experimental ones, too.───在靠近相变点的高温区，考虑高阶效应的影响后，理论值与实验值也有较好的符合。
The high-temperature region locates below the roof and the temperature gradient out of the combustion area is not obvious.───高温区域靠近顶板，燃烧区域以外岩石内温度梯度变化不明显；
To ensure safe and reliable operation of the equipment, high-temperature region must be isolated from the outside world.───为保证设备安全可靠运行，必须把高温区域与外界隔绝起来。
The results showed that low temperature region has a more great effect on drying process than high temperature region in muffle.───试验结果显示，在马弗炉内低温区干燥温度对垃圾干燥过程的影响较大；
In low temperature region, it is necessary to add the quantum correction to the kinetic energy computation of phonon.───在低温区时，需对能量输运粒子的动能计算进行量子修正；
In separate runs, pure carbon black burned in the temperature region 780-900 K (see Figure 5).───在单独运行时，纯碳黑色焚烧温度在780-900区域的K（见图5）。
The high temperature region ahead of the stir pin is narrower than that behind.───结果表明：搅拌摩擦焊是一种固态焊接方法，而且搅拌头前面的高温区域要比后方窄；
At the aspect of image enhancement technique, this paper proposed the adaptive gray-scale extension and enhanced the higher temperature region, which is important to this system.
An experimental study on a two-stage G-M refrigerator operating in the liquid helium temperature region with the cold regenerator outside of the displacer has been studied.
In intermediate temperature region(523-873K), the mechanism is a weak thermally activated process as the plastic flow is neither sensitive to temperature nor to the strain rate.