thermal deformation发音

意思翻译

热变形；热形变

相似词语短语

deformation───n.变形

plastic deformation───塑性变形，柔性变形；[力]塑性变形，塑性应变

ductile deformation───延性变形；柔性变形

deformation gradient───[力]变形梯度

deformation retraction───形变收缩

deformation definition───变形定义

elastic deformation───弹性变形；[力]弹性形变

deformation geology───变形地质学

thermal paste───热胶

双语使用场景

The thermal deformation often exceeds the allowed error.───热变形量往往超出允许的误差。

rule of ballscrew thermal deformation is given and summarized.───对丝杠的热变形规律进行了分析总结。

Thermal deformation processing: heat pressing, forging and rolling for metal and alloy.───热形变加工：金属及其合金的热压、锻造、轧制等形变加工。

The effects of the number, length and width of the slots on the thermal deformation of a circular sawblade were investigated in this paper.───本文研究了圆锯片径向槽的数量、长度、宽度对圆锯片热变形的影响。

This paper analyzed the difference between the temperature filed and thermal deformation in dynamic characters for spindle components.───文章对机床主轴组件温度场和热变形动态特性之间的差异进行了分析。

The difference between the temperature filed and thermal deformation in dynamic characters for spindle components is analyzed.───对机床主轴组件温度场和热变形动态特性之间的差异进行了分析。

The transformation process to turn the thermal deformation caused by temperature factor into the mechanical model is discussed.───对由温度因素引起的热变形转换为力学模型进行了论证。

In traditional method, we usually decrease or eliminate thermal deformation error through strictly controlling environment temperature.───在传统的方法中，一般是提出较为严格苛刻的测量环境温度控制条件来减轻或消除温度误差的影响。

The resin toughness, the casting of the thermal deformation temperature is a good comprehensive performance winding resin.───该树脂韧性好，是一种综合性能良好的缠绕用树脂。

英语使用场景

Thermal deformation error of Phased Array Antenna is one of the most primary factor that influent electrical performance of antenna, so it is very necessary to lucubrate.

The principal axis is one of the key parts in machines, so its thermal deformation influences the working accuracy of machines deeply.

Also, DSC is employed to obtain the thermal deformation field of the assembly structures of flip chip on ceramic substrate, especially for the strain concentrating area around the solder joints.

It was also found that increasing the length of the slots tended to make the sawblade more stable, whereas increasing the width of slots resulted in increased thermal deformation.

The resin produced by the flame-retardant products with high strength and mechanical properties, thermal deformation temperature, curing speed, and good soak.

The conventional calculation of thermal deformation of precision mechanism involves an exclusive consideration of the influence of temperature distribution on part deformation.

The material of super Invar is advised to use to minish the disadvantage of thermal deformation.

The thermal deformation calculation on base definition of expansion coefficient is analyzed.

High temperature, a number of tracks due to thermal deformation.